This is the Radio Controlled, Glow Powered, 1/8 scale
GT-V2 Touring Car 80% Roller Chassis with Type CV Body.
Partially assembled chassis requires engine and radio.
FEATURES: Chassis: Hard anodized aluminum 0.12" (3mm) thick
Drive: Four wheel shaft with front, rear, and center CVAs
Fuel Tank: 4.2oz (125cc)
Shocks: Big Bore, CNC Aluminum body, oil-filled, aluminum caps,
nitride coated shafts
Shock Towers: 0.20" (5mm) thick aluminum
Engine Mount: Two-piece CNC aluminum
Transmission: Ball bearing equipped 2-speed, adjustable shift and
engagement points, aluminum gear hubs for lighter weight
Differentials: Bevel gear
Brakes: Drilled dual fiber discs with metal spring return pads
Front Suspension: Steel shielded bearings and turnbuckles, solid
caster blocks and steering knuckles, CVAs ensure full bind-free
movement
Rear Suspension: Adjustable shock position and inner camber link
angles, swaybar to reduce roll, anti-squat plate and aluminum rear
toe plate with degree inserts, CVAs secured with sealed bearings
Tires: Rubber on-road tread pattern 1.6" (42mm) wide, 4" (102mm)
diameter with foam inserts
Wheels: Six spoke black plastic 1.6" (42mm) wide, 3.3" (83mm)
diameter
Steering: Spring loaded adjustable servo saver, CNC aluminum drag
link, adjustable Ackerman, Ackerman refers to the effect of the
inner front wheel turning faster than the outer front wheel during
turns
Body: Clear untrimmed lexan
Bumper: Front, foam, rear, plastic diffuser design
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
INCLUDES: GT-V2 Touring Car 80% Roller Chassis with Tires, Wheels, Air Filter,
Fuel Tubing, Clear Body, Rear Wing, Decals, Shock Oil, and
Instruction Manual
REQUIRES: Radio: 2-channel with high torque steering servo and 6V hump
receiver pack at least 1700mAH
Engine: .21 cu in (3.4cc) non-pull start with header and tuned pipe
Fuel: Car blend glow fuel with 20% nitro content
Glow starter, starter box, building & field equipment
SPECS: Vehicle-
Length: 24.8" (630mm)
Width: 12.6" (320mm)
Wheelbase: 14.5" (368mm)
Weight: 6lbs (2722g)
Body-
Length: 24.8" (630mm)
Width: 12" (305mm)
Height: 4.5" (115mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 6x10mm Steering 2 DTXC1561
2 8x16mm Fr Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 6x13mm Fr Diff Case 1 DTXC1573
2 6x13mm Rear Diff Case 1 DTXC1573
2 13x19mm Fr Hubs 1 ARZC2636
2 8x16mm Fr Hubs 1 DTXC1585
2 13x19mm Rear Hubs 1 ARZC2636
2 8x16mm Rear Hubs 1 DTXC1585
2 8x12mm flanged 2 sp Trans 1 DTXC1582
2 8x16mm 2 sp Trans 1 DTXC1585
2 5x8mm flanged Brake 1 DTXC1527
1 5x10mm Clutch 1 DTXC1535
1 5x11mm Clutch 1 DTXC1547
jxs 11/21/12
ir/jxs
| 
Primary Accessories
Primary Accessories
