This is the Glow Powered, 2.4GHz Radio Controlled, Ready to Run
                       1/8 scale Hobao Hyper 7 TQ Buggy.

FEATURES: Chassis: Anodized aluminum 0.12" (3mm) thick, gun metal gray in color
            with plastic side guards
          Drive: Four wheel shaft
          Engine: .28 cu in (4.6cc) with dual stage air filter and pull starter
          Exhaust: Polished aluminum tuned pipe
          Clutch: Three shoe, 13 tooth steel clutch bell
          Radio: HT-2.4EF 2.4GHz FHSS with two digital servos
          Shocks: Oil-filled 14mm Big Bore
          Shock Towers: Aluminum 0.16" (4mm) thick
          Differentials: Three, bevel gear type
          Fuel Tank: 5oz (150cc)
          Ball Bearings: Full set
          Wheels: Plastic dish type, black in color 1.49" (38mm) wide, 2.8"
            (71mm) diameter
          Tires: Rubber split Vee type with 4.48" (114mm) diameter, 1.5" (39mm)
            wide, with foam inserts
          Body: Trimmed and painted with white color scheme, black plastic rear
            wing
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: Hobao Hyper 7 TQ 1/8 scale Buggy, Engine, Air Filter, 2.4GHz Radio,
            Body, Decals, Fuel Bottle and Instruction Manual

REQUIRES: Fuel: Car blend with 15-30% nitro content
          Transmitter Batteries: 12 AA, 8 for transmitter, 4 for receiver
          Glow starter, maintenance and track equipment

SPECS:      Vehicle-
          Length: 18.1" (460mm)
          Width:  11.8" (300mm)
          Height:  5.5" (140mm)
          Front Track: 12" (305mm)
          Rear Track: 12.1" (308mm) distance between outer edges of wheels
            side-to-side
          Weight: 7.2lbs (3300g)
            Body-
          Length: 13.8" (351mm)
          Width:   8.8" (224mm)
          Height:  3.8" (98mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             6   8x16mm    Fr,Rear Diff                3    DTXC1585
             2   8x16mm    Front Gearbox               1    DTXC1585
             4   8x16mm    Steering Knuckles           2    DTXC1585
             4   6x10mm Flanged     Steering           2    DTXC1565
             2   8x16mm    Rear Gearbox                1    DTXC1585
             4   8x16mm    Rear Hubs                   2    DTXC1585
             2   5x10mm    Clutch                      1    DTXC1535

                                                                   jxs 11/07/12
                                                                         ir/jxs