This is the DuraTrax Onyx 11.1V 8000mAh 35C Shrink Wrapped LiPo Battery
                         with the Dean's Ultra Connector.

FEATURES: Ideal for 1/10 scale car applications
          Prewired with Dean's Ultra Connector

INCLUDES: 11.1V 8000mAh 35C Shrink Wrapped LiPo Battery with Dean's Ultra
            Connector

REQUIRES: Balancer and LiPo compatible charger or LiPo charger with built-in
            balancer such as the Onyx 235, DTXP4235

SPECS:    Voltage Rating: 11.1V
          Rated Capacity: 8000mAh
          Discharge Rating: 35C continuous
          Dimensions: 5.1 x 1.8 x 1.7" (130 x 46 x 43mm)
          Weight: 20.4oz (580g)
          Discharge Lead/Connectors: 12AWG Wires, Dean's Ultra
          Balancing Connector: ElectriFly
          Watt Hours: 89Wh

COMMENTS: ALWAYS use a LiPo-approved Charger
          ALWAYS use a LiPo Cell Balancer
          NEVER Charge over 4.2V per cell
          NEVER Charge at currents greater than 1C
          NEVER Charge through the "To ESC or "DISCHARGE" lead
          NEVER Trickle Charge
          NEVER allow to Discharge below 2.5V per cell
          NEVER disassemble or modify pack wiring in any way or puncture cells
          NEVER place on combustible materials or leave unattended during
            charging
          ALWAYS Charge in a fireproof location
          ALWAYS set charger's output volts to match battery volts
          ALWAYS keep out of reach of children
          All weights include wire leads and plugs
          All weights +/- 1 g

                                                                   jxs 02/14/13
                                                                         ir/jxs