This is the Hitec X1 AC Multi Function Plus AC/DC Multi Charger.
FEATURES: Charges 1-6 cell LiPo, LiFe and Li-Ion batteries
1-15 cell NiCd and NiMH batteries and
2-20V Pb (lead acid) cells
Operates on 11-18V DC or 100-240V AC power sources
Automatic charge and discharge current settings to prevent
overcharging
Cyclic charging/discharging-1 to 5 cyclic and continuous processes
for battery refreshing and balancing
Internal independent lithium battery balancer
"Fast" and "Storage" lithium battery charge modes
LiPo battery meter displays total battery voltage, each cell voltage,
and highest & lowest cell voltage
Balance board with balance plug sockets for JST-EH, JST-XH,
Thunder Power/Flight Power, and Hyperion/Polyquest balance plugs
on 3S, 4S, 5S, or 6S batteries. There are also 2S sockets for
JST-EH, JST-XH, and Tamiya LiFe balance plugs.
Delta peak voltage detection for NiCd and NiMH batteries
Re-peak mode for NiMH and NiCd batteries ensures batteries are fully
charged and checks how well the battery receives fast charges
Capacity and temperature limits
Data storage for up to five batteries
Servo tester for most digital and analog servos
One year limited warranty against material or operational defects
which are present at the time of purchase
INCLUDES: Charger with AC and DC Power Cords, Charge Lead with XT60 type
Connector, Charge Lead with Deans type Connector, Alligator Clips,
Universal Balance Board, and Instruction Manual
SPECS: AC Input: 100-240V
DC Input: 11-18V
Circuit Power: Max. Charge Power 50W
Max. Discharge Power 5W
Charge Current Range: 0.1-10A
Discharge Current Range: 01-1.5A
Disgcarge Current Power: 8W
Current Drain for Balancing LiPo: 200mA/cell
NiCd/NiMH Battery Cell Count: 1-15 cells
LiPo/LiFe LiIon Cell Count: 1-6 cells
Pb Battery Voltage: 2-20V
Net Weight: 18.5oz (525g)
Dimensions: 5.3 x 4.4 x 2.4" (135 x 112 x 60.9mm)
jxs 02/22/13
ir/jxs
| 
