This is the 1/8 scale, Glow Powered, Radio Controlled,
                      Hot Bodies Off-Road D812 Buggy Kit.

FEATURES: Chassis: 0.16" (4mm) thick 7075 aluminum with one-piece radio tray
            and steel skid plate
          Drive: Four wheel shaft drive with aluminum drive axles and new CVD
            boots that retain grease and keep our dirt to extend the life of
            the drive axles
          Engine Mount: One-piece CNC aluminum construction
          Fuel Tank: Plastic with flip top cap
          Air Filter: Foam low profile design
          Clutch: 3 shoe
          Clutch Bell: 16 tooth steel
          Transmission: Single speed
          Ball Bearings: Full set
          Shocks: Four oil-filled, 16mm big bore aluminum bodied long stroke
          Shock Towers: Aluminum
          Main Gear: 48 tooth
          Gearboxes: Sealed
          Differentials: Three planetary gear type
          Brakes: Dual disc
          Wheels: White plastic dish wheels, 3.2" (82mm) diameter, 1.6" (40mm)
            wide, 17mm hex
          Body: Clear untrimmed buggy body
          Bumpers: Front hardened plastic
          Suspension: Monocoque arms allow tuning for extra flex or greater
            stiffness, front and rear sway bars, C-hub front suspension
            with aluminum uprights and steel turnbuckles
          Caster: Adjustable front and rear, caster/toe-in refers to the
            angle of the suspension when viewed from the side of the car in
            relation to the chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Graphite steering knuckle arms
          Warranty Period: Two year limited beginning at date of purchase.
            Warranty valid only in the US, Canada and South America
INCLUDES: 1/8 scale Hot Bodies off-road Buggy Kit, foam air filter, body,
            wheels, 16 tooth clutch bell, 48 tooth spur gear, instructions,
            diff and shock oil, and decal sheet

REQUIRES: Radio: 2-Channel with 2 Servos (one high torque servo for steering)
          Radio Batteries: (8) AA size
          Receiver Pack: 6V hump
          Engine: .21 cu in (3.4cc) rear exhaust
          Exhaust: Tuned pipe
          Tires: 1/8 scale off-road buggy
          Glow Starter: 1.2 volt
          Paint: Polycarbonate for body
          Misc. Items: Fuel bottle, building and track equipment
          Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-
            Most of the fuels we carry meet or exceed the lubricant content
            required for optimum performance and maximum engine life.  In the
            past, the conventional lubricant content used in fuel was 18%.  But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the
            percentages of lubricant content are lower.  These high-tech
            lubricants provide exceptional cooling and protection.

SPECS:      Vehicle-
          Length:      18.9" (480mm)
          Width:       12.2" (310mm)
          Weight:
          Wheelbase:   12.9" (327mm) adjustable
          Gear Ratio: 4.3:1
            Body-
          Length:      14.8"  (375mm)
          Width:        7.3"  (186mm)
          Height:       4.2"  (107mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                 Qty.     Bearing Set
             2   6x10mm    Steering                   1       DTXC1561
             6   8x16mm    Diffs                      3       DTXC1585
             2   5x11mm    Clutch                     1       DTXC1547
             4   8x14mm    Front Hubs                 2       DTXC1583
             4   8x14mm    Rear Hubs                  2       DTXC1583

                                                                   jxs 12/27/12
                                                                         ir/jxs