This is the 1/10 scale electric powered, radio controlled,
            Associated RC10 B4.2 Factory Team off-road buggy kit.

FEATURES: Chassis: +8mm B4 composite tub type
          Drive: Two wheel with CVA drive shafts with pin retainer clips with
            steel center-drilled front axles
          Transmission: 2.6:1 laydown type, high-torque capacity with VTS
            slipper clutch (variable torque, multi-plate slipper with 3 drive
            surfaces)
          Ball Bearings: Full set, 14 rubber sealed
          Shocks: Factory Team 12mm Big Bore hard anodized aluminum with TiN
            "Gold" 3mm shock shafts
          Shock Towers: Optimized for the Big Bore shock
          Motor Plate: Factory Team blue aluminum milled construction
          Differentials: Ball type with lightweight outdrives
          Spur Gear: Plastic, 81 tooth, 48 pitch
          Wheels: Plastic yellow dish type front, 0.94" (24mm) wide, 2.4"
            (61mm) diameter, rear 1.5" (38mm) wide, 2.4" (61mm) diameter
          Wheel Hexes: Factory Team front and rear 12mm blue aluminum clamping
            type
          Body: ProLine Bulldog
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes
            the angle of the front tires as viewed from the top
          Suspension: Optimized for use with LiPo batteries, mounts for 4°,
            3.5°, 3°, and 2.5° rear toe
          Turnbuckles: Factory Team blue anodized titanium turnbuckles
          Front axles: Steel center drilled
          Steering: Factory Team aluminum bellcrank,
          Servo saver: Built-in with aluminum servo saver bolt and heavy duty
            spring
          Battery Strap: Carbon fiber with blue aluminum thumb screws

INCLUDES: Associated RC10 B4.1 Factory Team off-road buggy kit, clear Pro-Line
            Vortex body with wing, decals, wheels, shock oil and instruction
            manual

REQUIRES: Radio: Two-channel with high-speed servo
          Radio Batteries: (8) AA size
          Pinion Gear: Number of teeth to be determined by motor
          Motor: 540 size for buggy applications
           The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
           affordable motor and ESC for this vehicle.
          Battery: 6-cell NiMH with standard connector OR 2S LiPo battery
          Battery Charger: To match selected battery
          Building and track equipment

SPECS:      Vehicle;
          Length:  15.16" (385mm)
          Width: varies with type of tires used
          Weight: 3.4lbs (1530g) running weight will vary depending on parts
            installed
          Wheelbase: 11.1" (281mm)
          Internal Gear Ratio: 2.6:1
            Body:
          Length: 11.3" (287mm)
          Width:   5.5" (140mm)
          Height:  2.9" (73mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.   Size           Location               Qty.   Bearing Set
             4    3/16x3/8"      Transmission             2       DTXC1423
             2    10x16mm        Transmission             1       ASCC9832
             2    3/16x3/8"      Rear Hubs                1       DTXC1423
             2    .187x0.50x.196 Rear Hubs                1       ASCC7935
             4    3/16x3/8"      Front Hubs               1       DTXC1423

                                                                   jxs 01/18/13
                                                                         ir/jxs