This is the electric powered, 2.4GHz radio controlled, 1/10 scale, ready to run
            SC10 Team Associated/RC10.com Short Course Race Truck.

FEATURES: Chassis: Molded composite low CG design with side nerf bars,
            hinged battery hold down strap fits NiMH and LiPo battery packs
          Drive: Rear wheel with steel rear dogbone drive shafts
          Gearbox: 2.6:1 ratio gearbox equipped with sealed gear differential
          Motor: Reedy 17 turn brushed
          Radio: Associated XP2-SSi 2.4GHz 2-channel system with metal gear
            steering servo
          ESC: Associated XP SC200 with real-time braking, reverse, and reverse
            lockout
          Shocks: Oil filled, blue aluminum bodies
          Body: 0.040" (1mm) thick painted and trimmed
          Spur Gear: 87 tooth
          Slipper Clutch: Dual sided, externally adjustable
          Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black in
            color
          Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm)
            diameter, 1.7" (43mm) wide
          Caster: Adjustable, caster/toe-in refers to the angle of the
            suspension when viewed from the side of the car in relation to the
            chassis,
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Bumpers: Front and rear with functional rear rubber mud flaps
          Ball Bearings: 14 rubber sealed
          Suspension: Fully adjustable, steel turnbuckles, front and rear
            vertical ball end roll center adjustments
          Steering: Angled bellcrank "coplanar" steering with integral servo
            saver

INCLUDES: SC10 Short Course Race Truck from Associated with tires, wheels,
            ESC, painted body, brushed motor, 2.4GHz radio, instruction
            manual

REQUIRES: Transmitter Batteries: Eight AA-size
          Battery: 7.2V, 6-cell stick with Standard connector
          Battery Charger: NiMH compatible such as the Duratrax Onyx series
          Building and track equipment

SPECS:      Vehicle-
          Length: 21.6" (550mm)
          Width:  11.5" (293mm)
          Track:   9.6" (245mm)
          Weight:  4.6lbs (2080g)
          Wheelbase: 12.9" (327mm)
          Internal Gear Ratio: 2.6:1
            Body-
          Length  21.6" (550mm)
          Width   11.5" (293mm) at front fenders, widest point
                   8.8" (224mm) at center section, narrowest point
          Height:  6"   (153mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size         Location           Qty.     Bearing Set
             2   6x10mm      Transmission          1        DTXC1561
             2  3/16 x 3/8"  Transmission          1        DTXC1423
             2  3/16 x 3/8"  Idler Gear            1        DTXC1423
             4  3/16 x 3/8"  Rear Hubs             2        DTXC1423
             4  3/16 x 3/8"  Front Hubs            2        DTXC1423

                                                                   jxs 02/05/12
                                                                         ir/jxs