This is the Floquil 1oz (29.5ml) Wet Effect Enamel Stain from Testors.
Flammable and toxic
Apply stain with a fine brush around detail, seems, recessed and
standing detail or apply evenly over entire surface
Stain will naturally concentrate in corners and pull up flat
Let dry for 15 minutes, remove excess with thinner using either a
moistened cloth or fine brush
Leave 24 hours for full cure
Seal with clear coat
Thin paint 3 parts paint to 2 parts thinner
Adjust compressor to 20-25 PSI
For Aztek Airbrushes use high flow nozzles, Red #9342C, Orange
#9343C, or Yellow #9344C
Other brand airbrushes use a #3 needle
One 1oz (29.5ml) Wet Effect Enamel Stain
Eye, Lung and Skin protection
Keep out of the reach of children
– If you need more information, use these Floquil resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.