This is the Novak Impact Racing Electronic Speed Control
and the Ballistic 7.5 Turn 540 Size 5800kV Motor.
FEATURES: ESC (NOVC1730);
Meets ROAR Sportsman Class Racing specs
Ideal for all 1/10 scale 2WD on and off-road racing, 1/12 scale
racing, and popular 1S and 2S LiPo classes
Auto-detect LiPo battery protection circuitry reduces power as needed
to protect batteries from going below the safety voltage
Novak Super Tuner with multiple on-board adjustable settings
including;
Drive Tuning: Dynamic Timing Advance, RPM (Start/Final/Range)
Drive Frequency, and Minimum Drive
Brake Tuning: Brake Frequency, Drag Brake, and Minimum Brake
Additional Tuning: Deadband, Reverse Disable, and LiPo Protection
(On/Off)
NovaBrakes for instant braking under any condition
Novak X-Drive for enhanced throttle response, smooth power delivery,
higher top speeds, and cooler operating temperatures
Cooling fan with plug-in harness
Sensor based for excellent torque and low-speed drivability
On-board diagnostic temperature monitoring
Thermal overload protection circuitry
Water resistant case with protective silicone gasket
Gold-plated, direct-solder wiring tabs
On-board Hall Sensor Test top verify that motor's sensors are
working properly
Ballistic Brushless 7.5 Turn Motor (NOVC3607);
Completely rebuildable allowing upgrades or replacement of various
parts
Easy to adjust timing assembly
Meets ROAR and IFMAR specifications
12.3mm nickel-plated sintered neodymium rotor for maximum
performance in high-temperature conditions
0.125" (3.2mm) pinion shaft accepts all existing pinion gears
Sensor-based for excellent torque and low-speed driveability
120 day limited warranty on both components through Novak
INCLUDES: Novak Impact Brushless ESC with Heat Sink, 14GA Power Wires, Glitch
Buster, Cooling Fan, Double-Sided Mounting Tape and Instructions,
Ballistic Brushless 7.5 Turn Motor with Sensor Wire
SPECS: ESC;
Input Cells: 1-2S LiPo / 4-6-cell NiMH (1S Booster Module (NOVC5477)
recommended if using 1S LiPo Battery)
Size: 1.15 x 0.95 x 0.79" (29 x 24.3 x 20mm)
Weight: 0.75oz (21.3g)
On-Resistance: 0.0004 ohms @ 25°C trans temperature
Motor Compatiblilty: 540 size sensored brushless motor (2-pole)
BEC: 6.0V DC/2.0 amps
Wire Size: 14G Super-Flex Novak Silicone Wire
Motor;
Watts: 340
kV: 5800 RPM/volt (unloaded)
Sensor Harness Length: 9" (230mm)
Motor Size: 2.07 x 1.41" (52.6 x 35.8mm)
Motor Weight: 6.6oz (187g)
Magnetic Material Operating Temp:* 392°F (200°C)
* Motor is not capable of operating at 392°F (200°C). The recommended
operating temperature is 160°F (70°C)
jxs 10/25/12
ir/jxs
| 
