This is a 1 oz glass bottle of Enamel Hi-Gloss Paint.|
Made especially for use over Floquil Enamel paints to give a smooth
gloss finish, ideal surface for applying decals to the models.
Permanent on all surfaces and safe for most plastics.
Dries to touch in 2 to 5 minutes and requires no baking or curing.
One glass bottle of Enamel Hi-Gloss Paint
For application, use an airbrush or paint brush.
Floquil Dio-Sol thinner/brush cleaner for clean up.
Lung, eye and skin protection (see COMMENTS).
Amount: 1 fluid ounce (29.6ml)
Directions: -Stir Well.
-To apply with brush: Use thin strokes.
-To apply with airbrush: Thin 75% paint to 25% Floquil
-Allow overnight dry time between coatings.
Contains: Petroleum Distillates. Keep away from heat, sparks and
Keep Out Of Reach Of Children.
Vapor Harmful. Causes eye and skin irritation. To avoid breathing
vapors and spray mist, open windows and doors to ensure fresh air
entry during application and drying. If you experience eye
watering, headaches or dizziness, increase fresh air entry or wear
respiratory protection. Use only with adequate ventilation.
Close container after each use.
Danger: Can be harmful or fatal if swallowed.
First Aid: If swallowed Do NOT Induce Vomiting. Call Physician