Phoenix Model 1/5 MXS GP/EP ARF 57.9"

Tower Stock# PMMA1625  •  Manufacturer Stock# PH131
Phoenix Model 1/5 MXS GP/EP ARF 57.9
Notes from our tech department:
This is the Radio Controlled Glow or Electric Powered, 1/5 scale
ARF Phoenix Model MXS Scale Aerobatic Airplane.
For Intermediate Modeler/Flyers.


Construction: Balsa and ply
Wing: Two-piece with joiner tube
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Fiberglass construction, painted to match covering scheme
Landing Gear: Aluminum prebent main gear, spring wire steerable tail
Wheels: Main --" (--mm) diameter, --" (--mm) diameter tail gear
Wheel Pants: Plastic construction, red in color
Spinner: Red plastic 2.3" (58mm) diameter
Fuel Tank: --oz (--cc)
Engine Mount: Two piece composite
Motor Mount: Plywood


MXS Scale Aerobatic Airplane with Landing Gear, Wheels, Wheel Pants,
Spinner, Fuel Tank, Motor Mount, Engine Mount and Instructions


Radio: At least 4-channel
Servo: 5 standard: 2-aileron, 1-elevator, 1-rudder, 1-throttle
Receiver Battery: 4.8-6V 800-1200mAh
Glow Power;
Engine: .46-.55 cu in 2-stroke or .52 cu in 4-stroke
Propeller: Depending on selected engine
Electric Power;
Motor: RIMFIRE .46-.55
Lipo Battery: 6S, at least 4000mAh with LiPo charging bag
ESC: 50-80A

Building and field equipment


Wingspan: 57.9" (1472mm)
Length: 52.2" (1335mm)
Flying Weight: 6.17-606lbs (2800-3000g)
Wing Area: 597 sq in (38.5 sq dm)
Wing Loading: 24.90 oz sq dm (76g/sq dm)
Servo Mount: 0.83 x 1.6" (21mm x 42mm)
Center of Gravity (CG): 3.5" (90mm) back from the leading edge of
the wing at the fuselage
Control Throws: Low High
Ailerons: 8mm up/down 10% expo 10mm up/down 10% expo
Elevator: 8mm up/down 12% expo 10mm up/down 12% expo
Rudder: 25mm right/left 15% expo 40mm right/left 15% expo

jxs 05/27/15

Know Before You Fly
Easy RC: Airplanes
Review #1
‐ Mailing Address ‐
‐ Additional Contact Information ‐