Castle Creations 1/8 Mamba Monster X WP ESC/2200kV

Tower Stock# LR9968  •  Manufacturer Stock# 010-0145-01
Castle Creations 1/8 Mamba Monster X WP ESC/2200kV (large view)
Easy Pay
Request 3 Payments of $67.08 Details
Notes from our tech department:
This is the Castle Creations Mamba Monster X Waterproof ESC and
1515-2200Kv Brushless Motor.


For 1/8 scale buggies, truggies and on-road vehicles, and 1/10 scale
monster trucks weighing up to 15lbs (6.8kg)
2S-6S LiPo compatible
Adjustable BEC (battery eliminator circuit) 5.5V, 6.0V, 7.5V, or 8.0V
8A Peak), default 5.5V
Profiles can be custom designed on a PC with the Castle Link
PC programming software (software not included, can be
downloaded for free from Castle's website, voucher is included for
free Castle Link Programmer)
Castle Link Adjustable settings include;
Brake/Reverse Type
LiPo Cutoff Voltage
Brake Amount
Drag Brake
Motor Type
Programmable Auxiliary Wire (AUX) allows adjustments to several
settings such as torque control and max throttle from a compatible
Sensored motor capable with purchase of optional (not included)
Sensor harness from Castle Creations
Telemetry ready with purchase of Castle Creations S.BUS Telemetry
One year limited warranty through Castle Creations beginning at date
of purchase

Oversize ABEC-1 front and rear bearings
Sintered neodymium magnets


Castle Creations Mamba Monster X ESC with On/Off Switch, pretinned
Battery Leads, Receiver Connector, Female Motor Connectors, 30mm
Cooling Fan, 1515-2200Kv Brushless Motor, Instruction Booklet
Voucher for free Castle Link Programmer


Compatible LiPo Battery
Battery Connectors, Castle Creations 6.5mm are recommended


Input Voltage Range: Min. 2S LiPo, Max. 6S, 25.2V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Switch: Yes
Dimensions: 2.08 x 1.9" (53 x 49mm)
Weight: 3.91oz (111.1g) with wires
Dimensions: 1.6 x 2.9" (39.98 x 75.2mm)
Weight: 15oz (424g)
Max Vehicle Weight: 15lbs (6.8kg)
Mounting Hole Specifications: 3mm @ 25mm
Shaft Diameter: 0.196" (5mm)
Max RPM: 60,000
Connectors: 6.5mm bullet
Wire Length: 7.25" (184mm) OK to shorten
Wire Size: 10AWG
Kv rating: 2200kV
Max Input Voltage: 25.2
Amp Rating: 120


Not intended for operation while submerged in liquid. If unit is
operated in wet conditions, rinse with fresh water to remove
dirt or corrosives, then fully dry unit. Cooling fan is not
waterproof and must be removed prior driving in wet conditions.

jxs 08/18/15

See Tower Catalog page 125.
Review #1
‐ Mailing Address ‐
‐ Additional Contact Information ‐