This is a Left Offset Main Gear Robostrut for 4 to 12 pound Sport, Scale, or
Jet Aircraft. It Duplicates the Shock Absorbing Action of Full Scale Landing
Gear. Smooths out Bumps or Hard Landings, Improves Ground Tracking and Protects
your Valuable Radio Gear from Shock Damage.
Aircraft Grade Chrome-Moly Steel Construction Pre-Primed Gray
Heat Treated Axle and Functional Torque Link Shock Absorber
P-51 Style Offset Strut
Low Weight of Only 1lb 1.3oz Each
Can be Retrofitted to Most Retract Systems
Scale or Semi-Scale in Appearance
Replaces Wire Landing Gear
One 653L Left Offset Main Gear Strut
Two 5/32" Adapter Bushings for Wire Struts
Two 3/16" Adapter Bushings for Wire Struts
Two 3/16" Diameter Axles w/E-Clip
Four 4-40 Set Screws
One 3" to 3-1/4" Sized Wheel
Low Heat Solder or JB Weld (to secure the adapter bushing)
Threadlocking Compound (for securing set screws)
Tools for Assembly
The Right Offset Strut to match this one is ROBQ1706.
– If you need more information, use these Robart resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.