ARRMA 1/10 Senton 6S BLX Brushless 4WD RTR

Tower Stock# ARAD83**  •  Manufacturer Stock# ARAD83**
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). Exposure through skin contact and ingestion may occur.
  • front/side (see larger view)
  • rear/side (see larger view)
Easy Pay
Request 3 Payments ($150.01, $149.99, $149.99) Details
Color Availability
Notes from our tech department:
This is the 2.4GHz Radio Controlled, Brushless Powered
1/10 scale Ready to Run Senton 6S BLX Short Course Truck from Arrma.
For Modelers 14 Years of Age and Older.

FEATURES

Chassis: 0.12" (3mm) thick aluminum, with side impact bumpers
Drive: Four wheel with CVD driveshafts
Radio: Tactic TTX300 3-channel with user programmable 3rd channel,
steering rate adjustment, steering and throttle trim & end point
adjustments, 3-channel TR326 high voltage (7.4V) micro receiver
with failsafe, 70/30 throttle setting
Steering Servo: ADS-15M metal geared with 208 oz/in torque,
.12 sec @ 60° transit speed
Motor: 2050kV brushless
ESC: Arrma BLX185 150A
Shocks: Aluminum body, oil filled, big bore
Shock Towers: 0.20" (5mm) thick aluminum
Suspension: Reinforced hangers with inboard hinge pins that are less
likely to pop out
Body: Trimmed and painted
Motor Mount: Aluminum
Gearboxes: Fully sealed
Tires: dboots Sidewinder 2, 1.7" (44mm) wide, 4.2" (108mm) diameter
2.2"/3" mounting bead
Wheels: Plastic construction, black in color, 2.2" (56mm) outer
diameter, 1.6" (41.5mm) wide, 17mm hex
Pinion Gear: Steel construction 12T Mod 1
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Warranty: Two year limited warranty beginning at date of purchase

INCLUDES

RTR Senton 6S BLX Short Course Truck with 2.4GHz Radio, Brushless
Motor, ESC, Painted Body, Instruction Manual

REQUIREMENTS

AA Batteries: Four for transmitter
LiPo Battery: Two 2-3S 5000mAh 35C minimum LiPo with XT90
connector, Duratrax 11.1V 5000mAh 35C batteries (DTXC1969)
recommended, or one 4-6S LiPo battery
Battery Charger: To match selected battery
LiPo charging sack, building & track equipment

SPECIFICATIONS

Vehicle-
Length: 22" (560mm)
Width: 11.6" (295mm)
Height: 7.67" (195mm)
Wheelbase: 12.5-12.67" (318-322mm)
Weight: 127oz (3.6kg)
Final Gear Ratio: 11.79
Pinion and Spur Gear Pitsh: 1M
Maximum Battery Dimensions: 6.2 x 2.0 x 1.8" (158 x 51 x 46mm)
Body-
Length: 21.7" (552mm)
Width: 9.5" (242mm) behind front wheels, narrowest point
12.4" (315mm) at rear wheels, widest point
Height 5.5" (140mm)

COMMENTS

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 15x21mm Fr Uprights 1 ARAC3162
2 8x16mm Fr Uprights 1 ARAC3156
2 15x21mm Rear Uprights 1 ARAC3162
2 8x16mm Rear Uprights 1 ARAC3156
1 8x19mm Fr Input Gear 1 ARAC3159
1 8x19mm Ctr Input Gear 1 ARAC3159
1 8x16mm Fr Diff 1 ARAC3156
1 8x16mm Rear Diff 1 ARAC3156
1 5x11mm Rear Gearbox 1 ARAC3150

jam 11/03/15
ir/jxs

Resources
See Tower Catalog page 79.
Easy RC: Cars & Trucks
Review #1
Review #2
Review #3
Review #4
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐