RC Gear Shop Duratrax .18 Side Exhaust Racing Engine

Tower Stock# RGZG1018  •  Manufacturer Stock# RGZG1018
RC Gear Shop Duratrax .18 Side Exhaust Racing Engine (large view)
Quantity Discounts Available
Save $4.50
2 for $95.48
Notes from our tech department:
This is the RC Gear Shop 18R Engine with Super Start Backplate.

**Additional Technical Info Will Be Added When It Becomes Available.**


Works with the following vehicles;
HPI 1/10 Nitro RS4 3 Evo+
HPI 1/10 Firestorm 10T
Duratrax 1/10 GTR Nitro
Duratrax 1/10 Camaro ZL1
Associated 1/10 SC10GT
* All require pull starter (DTXG0756), and clutch nut
Also works with:
Traxxas Nitro Stampede
Traxxas Nitro Sport SE
* Both require pull starter (DTXG0756), or Super Start (RGZP3000)
and Clutch Nut
Also works with many other older nitro off-road buggies and stadium
trucks that use a .12-.18 size engine with a rotary carb, and
standard shaft. Some modifications may be required depending on
Ten cooling fins on cylinder head, black in color
Rotary carburetor


18R Engine with Super Start Backplate and Glow Plug


Fuel: 10-30% nitro content, 20% recommended for break-in
Exhaust System: Depending on vehicle
Glow starter, plug wrench, and track equipment


Displacement: 0.184 cu in (3.02cc)
Bore: 0.63" (16.0mm)
Stroke: 0.59" (15.0mm)
Distance Between Mounting Hole Centers Same Side: 0.47" (12mm)
Distance Betwwen Mounting Hole Centers Opposite Side: 1.2" (32mm)
Height/Crankcase Bottom/top of Cylinder Head: 3.6" (91mm)
Height/bottom of Mounting Flange/top of Cylinder Head: 3.1" (79.1mm)
Length/Backplate to Front Bearing: 2.7" (69.5mm)
Length/Backplate to end of Crankshaft: 3.4" (86.5mm)
Exhaust Port Mounting Hole Centers: 1.2" (27.2mm)
Width including Mounting Flanges: 1.5" (39mm)
Crankcase Width Below Mounting Flanges: 0.99" (25.2mm)
Width of Backplate: 1.7" (43mm)

jxs 06/27/14

Parts Compatibility
Easy RC: Engines
‐ Mailing Address ‐
‐ Additional Contact Information ‐