This is the 1/10 scale, radio controlled, electric powered, ready to run
                   RC10B4.1 Off-Road Buggy from Associated.

FEATURES: Chassis: Molded composite, low CG
          Drive: Rear wheel
          Motor: Reedy 3300kV brushless
          Radio: 2.4GHz XP3-SS 3-channel with SHV1504 metal gear steering servo
            and brushless ESC with brake and reverse
          Electronic Speed Control: XP SC450-BL with forward and reverse,
            reverse lockout and LiPo cutoff, Deans Ultra plug battery connector
          Differential: Sealed planetary gear, 2.6:1 ratio
          Slipper Clutch: Dual sided, adjustable
          Spur Gear: Composite construction 81 tooth, 48 pitch
          Shocks: Blue aluminum body, fluid filled with molded pre-load clips
          Battery Holder: Strap with twist-lock thumb knobs
          Ball Bearings: Rubber sealed in gearbox
          Body: Painted Interceptor buggy 2.0 polycarbonate
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Wheels: White dish style Front, 0.87" (22mm) wide, 2.2" (56mm) dia.
                                   Rear,  1.4" (37mm) wide, 2.2" (56mm) dia.
          Tires:                   Front, 1.1" (28mm) wide, 3.2" (81mm) dia.
                                   Rear, 1.7" (44mm) wide,   3.2" (81mm) dia.
          Steering: Angled bellcrank "co-planar" with servo saver

INCLUDES: Assembled RC10B4.1 Off-Road Buggy with brushless motor, 2.4GHz radio,
            ESC, painted body, decals and instructions

REQUIRES: AA Batteries: 8 for transmitter
          Battery: NiMH or LiPo
          Battery Charger: For selected battery type
          Building and track equipment

SPECS:      Vehicle-
          Length:    14.8" (377mm)
          Width:      9.8" (250mm)
          Height:     5.5" (140mm) measured at rear wing
          Wheelbase: 10.7" (273mm)
          Weight:     3.4lbs (1530g)
          Internal Gear Ratio: 2.6:1
            Body-
          Length:    11"   (279mm)
          Width:      6.3" (160mm) at widest point
          Height:     2.5" (64mm)

COMMENTS: The RC10B4.1 Brushless Powered Off-Road Buggy is available in the
            following color schemes;
            Blue/White, ASCD39BW
            Gray/White, ASCD39EW

          For Replacement Ball Bearings use:
            Qty.  Size        Location              Qty.   Bearing Set
             2   3/16x3/8"  Transmission             1      DTXC1423
             2   10x16mm    Transmission             1      ASCC9832
             2   3/16x3/8"  Idler Gear               1      DTXC1423
             4   3/16x3/8"  Rear Hubs                2      DTXC1423
             4   3/16x3/8"  Front Hubs               2      DTXC1423

                                                                   jxs 12/28/09
                                                                         ir/jxs