Traxxas 1/10 Nitro Sport SE TQ RTR

Tower Stock# LWL902**  •  Manufacturer Stock# 45104-1
Traxxas 1/10 Nitro Sport SE TQ RTR (large view)
Easy Pay
Request 3 Payments of $94.99 Details
Color Availability
Notes from our tech department:
This is the Traxxas Nitro Sport Ready-to-Run 1/10 scale Stadium Race Truck
with the 2.4GHz Traxxas TQ Pistol Grip Radio
and On-Board Push Button EZ Start System.
This kit is based on the Nitro Rustler.

**The included TQ 2.4GHz radio system is compatible only with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FEATURES

(RTR) Ready To Run with radio system installed
Traxxas TQ 2.4GHz radio with waterproof digital high-torque
steering servo, waterproof receiver box
T-6 flat aluminum chassis rear and black fiber composite front
Countersunk holes under the chassis
Fiber composite upper plate/front brace
4 composite oil-filled Ultra shocks with white powder coated springs
4-wheel independent suspension
Telescoping U-joint drive shafts
281 Magnum, 6 (5x11mm) ball bearing transmission with adjustable
slipper clutch and planetary gear differential with steel internal
gears
75cc fuel tank with flip-top lid and primer bulb
Adjustable turnbuckle tie-rods
Composite black tuned pipe with pressure fitting
Disc brake (composite)
Fiberglass front hinge pin brace (tie bar)
Five color ProGraphix painted body with bolt-on wing
Twin Spoke 2.2" wheels
Alias dual pin rear tires and ribbed fron tires with foam inserts
Single point steering
Black colored composite parts
Front and rear bumpers
Pre-installed servo saver on servo
Black composite cover for the receiver and receiver battery box
Servo reversing and trim on radio
Air filter (one stage, bell shaped)
Ballon type receiver cover
2.5 ounce (75cc) fuel tank with rubber mount cushions
Pre-painted polycarbonate body with rear spoiler
Push button EZ start system with battery and 2-amp DC Peak
Detecting Fast Charger that starts the engine with an on-board
motor
2-shoe clutch system
TRX Pro.15 engine w/ round alum heatsink (non-anodized) head
foam bell type air filter, ball bearings, short crankshaft,
ABC construction, easy adjust two needle carburetor,
on-board electric motor start system and glow starter,
starter, tuned pipe, glow plug, metal throttle arm,
aluminum piston with oil groove, channeled beam conecting rod

SPECIFICATIONS

Length: 17.27" (439mm)
Front track: 12-1/2" (318mm)
Rear track: 12-3/8" (314mm)
Weight: 62 ounces (without radio)
Height: 6" (152mm)
Wheelbase: 11.313" (287mm)
Wheel diameter: 2.2"
Fuel capacity: 2.5 ounces (75cc)
Engine: TRX Pro.15
Gear ratio: Adjustable 8.43:1 to 12.64:1
Differential: Planetary gear type (not ball)
Brake: Disc
Chassis: Double-decked (aluminum and composite)
Spur gear: 70 black nylon tooth (32 pitch)
Clutch bell: 20 tooth black steel (32 pitch)
Castor block front 30 degrees

INCLUDES

One TQ 2.4GHz pistol grip radio
One Nitro Sport assembled with TRX-Pro .15 and two glow plugs
One Pre-Painted ProGraphix Body and Spoiler
One Decal sheet
One EZ start module with battery and DC powered charger
One Black plastic shock collars and pistons
One Antenna tube and cap
Six 5x11mm ball bearings in transmission
Eight 5x11mm metal bushings for wheels
Two 5x10mm bearings for clutch
One Extra receiver cover balloon
One Instructions
One Window mask sheet
One fuel bottle

REQUIREMENTS

Eight "AA" batteries, four for transmitter, four for battery box
Fuel

COMMENTS

For ball bearings use:
8- 5x11mm for wheels (DTXC1549 10 pack)
6- 5x11mm for transmission
2- 5x10mm for clutch (DTXC1535 2 pack)
Optional slipper clutch TRAC9615

Available in the following colors;
Blue, TRAC14BB Red, TRAC14RR
Black, TRAC14LL Silver, TRAC14SS

REPLACING EZ STARTER WITH STANDARD RECOIL STARTER
To convert the EZ-Starting system to a standard pull-starter,
purchase TRAG4070 take out the three bolts on the EZ-Starter,
and install recoil starter.

jxs 10/31/14
ir/jxs

Resources
See Tower Catalog page 104.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐