Traxxas 1/10 Nitro Stampede TSM RTR

Tower Stock# TRAD08**  •  Manufacturer Stock# 41096-3
Traxxas 1/10 Nitro Stampede TSM RTR (large view)
Coupon discount not allowed by manufacturer for this product
Notes from our tech department:
This is the glow powered, radio controlled Ready-To-Run
Traxxas Nitro Stampede 1/10 scale Monster Truck
with Traxxas Stability Management.

**The included TQ 2.4GHz radio system is compatible only with the**
**#6533 receiver and does NOT accept the Docking Base accessory.**


Traxxas Stability Management (TSM): Superior tuning algorithms run on
high-speed electronic components to control wheel spin and steering
direction on loose dirt, concrete and even ice and snow. TSM can be
fine tuned or turned off by adjusting the multi-function knob on
the TQi transmitter or the slider in the Traxxas Link app
Chassis: 6061 T-6 aluminum anodized blue
Radio: Traxxas TQ 2.4GHz
Engine: Traxxas Pro .15 (2.5cc) with two-needle rotary carb, glow
plug and EZ-Start electric starter with battery and charger
Exhaust: Composite construction rear tuned pipe with two outlets
Drive: Rear wheel
Body: Pre-painted, pre-cut polycarbonate body with decals applied
Ball Bearings: Full set included, rubber sealed
Shocks: Four Ultra shocks oil-filled w/ powder coated White springs
Slipper Clutch: Adjustable
Suspension: 4-wheel independent
Transmission: Magnum 375 with 32 pitch gears and ball bearings
Differential: Planetary gear with steel internal gears
Spur Gear: 66-tooth composite construction
Clutch Bell: 18 tooth steel
Fuel Tank: 2.5oz (75cc) with flip-top lid and primer bulb
Brake: Composite disc type
Tires: Revo spec Talon 2.8" (71mm) inner diameter 4.75" (121mm) outer
diameter with foam inserts
Wheels: Chrome finish 5-spoke Traxxas All Star 2.8" (71mm) diameter,
2.0" (51mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Assembled Nitro Stampede with Pro .15 (2.5cc) engine and glow plug,
EZ-Start electric starter, painted body with decals, TQ 2.4GHz
radio, two servos, instruction sheet, 66-tooth spur gear, 18-tooth
clutch bell, TSM, battery and 110V charger for EZ-Start


"AA" Batteries: 8 (4 for transmitter and 4 for receiver)
Fuel: Car fuel with 10-15% nitromethane content
Misc. Items: Fuel bottle and building and track equipment


Length: 17" (432mm)
Front and Rear Track: 12.75" (324mm)
Weight: 5.2lb (2.35kg)
Height: 9.5" (241mm)
Wheelbase: 10.75" (273mm)
Ground Clearance: 4" (102mm)
Gear Ratio: 3.75:1 (internal)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x11mm Front Wheels 2 DTXC1547
4 5x11mm Rear Wheels 2 DTXC1547
6 5x11mm Transmission 3 DTXC1547
2 5x11mm Clutch Bell 1 DTXC1547

To convert the EZ starting to a standard pull starter, purchase
part numbers TRAG5170, TRAP5211 one-way bearing, four 3x8mm machine
screws, take out the three bolts on the EZ-Starter clip the wires
on the EZ-Starter, and install recoil pull starter.

Available with the following color schemes;
Blue and Black, TRAD08BL Red and Black, TRAD08RL
Blue and Silver, TRAD08BS Red and Silver, TRAD08RS

jxs 11/03/15

See Tower Catalog page 104.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐