Traxxas 1/10 Nitro Jato 3.3 TQi Bluetooth 2WD RTR

Tower Stock# TRAD70**  •  Manufacturer Stock# 55077-1
Traxxas 1/10 Nitro Jato 3.3 TQi Bluetooth 2WD RTR (large view)
Notes from our tech department:
This is the 2.4GHz radio controlled, glow powered, 1/10 scale, Ready-To-Run
Traxxas Jato 3.3 Stadium Truck with Bluetooth Connectivity.
**Does not include Docking Base**
New features different from the 2.5 Jato include;
3.3 Racing Engine
Resonator Blue Anodized Aluminum Tuned Pipe
2.8" (71mm) wide Anaconda Performance Tires
Front & Rear Sway Bars for Increased Stability


Chassis: 1.16" (3mm) thick 6061 T6 aluminum, Blue-anodized, fully
countersunk with buggy style mud guards, and choice of
receiver pack placement-between the engine and fuel tank
or in the rear compartment
Drive Type: Two wheel with Universal joint axles with dust boots
operate at the most extreme deflection angles to allow for the most
suspension travel
Engine: Traxxas .20 cu in (3.3cc) racing engine w/Slide Valve Carb,
12mm diameter IPS crankshaft, foam air filter, Blue anodized
aluminum tuned pipe, extra glow plug, EZ-Start push-button
electric starter with battery and 2A DC peak detecting charger,
60% more peak horsepower than the TRX 2.5 engine
Radio: Traxxas TQi 2.4GHz high output with Traxxas Link automatic
model recognition, Bluetooth connectivity, 5 channel receiver with
telemetry ports, factory installed RPM, speed, temperature, voltage
and telemetry sensors, failsafe and wireless module is included
and enables model to be tuned from an iPhone 3G/3GS/4/4S, or
iPod Touch 2nd/3rd/4th generation (Traxxas Link App must be
be downloaded if wanting to use an iPhone or iPod Touch).
Intuitive, high definition graphical user interface featuring
Real-Time Telemetry, Customizable Dashboards, Steering/Throttle
Expo, Steering/Braking Dual Rate, Servo Reversing, Endpoint
Adjustment, Profile Customization and Sharing
**Docking Base not included**
Shocks: Four oil filled precision GTR Revo-style with threaded
composite shock bodies
Wheels: 2.85" (72.4) diameter 1.89" (48mm) wide Chrome finish
Ball Bearings: Full set, rubber sealed
Tires: Pre-glued Anaconda with horizontal bead design 3.93"
(100mm) diameter, 2.8" (71mm) wide
Body: Pre-painted Lexan racing truck style with decals applied,
available in Black with 4 striping color schemes depending on
radio channel choice, see COMMENTS
Gearbox: Sealed Revo-style silicone filled, with heavy-duty slipper
clutch constructed of semi-metallic friction material and finned
aluminum alloy pressure plates, spur gears can be removed and
replaced without altering slipper adjustment
Brake: Semi-metallic brake disc with steel pads eliminate fade caused
by heat buildup
Transmission: Internal, adjustable 2-speed with Torque Control
slipper clutch
Gear Differential: Sealed, limited slip, fully tunable with silicone
shock oils
Steering: Angled steering bellcranks for zero bump steer
Clutch: 2-shoe
Suspension: Fully adjustable including roll centers, anti-squat
and rear toe, ride height and weight bias also features 30 caster
blocks with 25 option and captured, hardened-steel hingepins and
captured double sheer rod ends
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when when viewed from front or behind vehicle
Fuel Tank: 2.5oz (75cc) flip top with remote fingertip pull


One pre-built Jato 3.3 truck, pre-painted Lexan body, owner's manual,
registration card, EZ Start handheld unit with battery and 2A
charger, extra air filter and oil, tool set, wheelie bar, DVD
operator's guide, 2-channel TQi 2.4GHz radio with Bluetooth
Connectivity, antenna tube and mount, extra glow plug, tools and
fuel bottle


Fuel: Car blend with 10-20% nitro content
Batteries: 8 AA four for transmitter and four for receiver
Building and field equipment


Length: 16.53" (420mm)
Width: 12.87" (327mm) at front wheels
Height: 5.70" (145mm)
Wheelbase: Long, 11.22" (285) Short, 11.14" (283mm)
Tread-Front: 10.6" (270mm)
Rear: 10.6" (270mm) wheels on-center side-to-side
Track-Front: 12.87" (327mm)
Rear: 13" (330mm)
Weight: 4.72lb (75.6oz) RTR, without fuel
Front Tires: Victory ribbed and spiked 3.93" (100mm) diameter
Rear Tires: Victory spiked 3.93" (100mm)
Wheels: 2.85" (72.4mm) diameter
Total Gear Reduction: 11.73:1 (1st), 8.75:1 (2nd)


Available in the following body colors;
Blue TRAD70BB Red/Yellow, TRAD70RY
Red, TRAD70RR Yellow, TRAD70YY

For replacement bearings order:
Qty. Size Location Qty Bearing Set
4 5x11mm F.wheels 2 DTXC1553
2 5x11mm R.wheels 1 DTXC1553
2 10x15mm R.wheels 1 DTXC1595
5 5x11mm Transmission 3 DTXC1553
3 10x15mm Transmission 2 DTXC1595
*Optional 4 4x7mm Steering 2 DTXC1507
*Optional 2 5x8mm Brake Bellcrank 1 DTXC1523

jxs 03/01/10
updt jxs 03/13/13

See Tower Catalog page 107.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐