Hubsan LiPo 3S 11.1V 7000mAh Battery Pack X4 Pro

Tower Stock# HBNE3016  •  Manufacturer Stock# H109S-17
Hubsan LiPo 3S 11.1V 7000mAh Battery Pack X4 Pro (large view)
Shipping Restricted ItemDetails
Shipping Note:Details
Product WarningDetails
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 11.1V 7000mAh LiPo Battery
for the Hubsan X4 Pro FPV Quadcopter with Touch Screen Transceiver, HBNE0010
and the X4 Pro FPV Quadcopter with Parachute Recovery System, HBNE0020.


Shrink wrapped cells


11.1V 7000mAh LiPo Battery with Balance Connector and XT60 Discharge


Battery charger such as the Hubsan Balancing Charger, HBNE3029
LiPo charging bag


Capacity: 7000mAh
Weight: 13.4oz (380g)
Dimensions: 4.3 x 1.3 x 1.7" (109 x 33 x 44mm)
Watt Hours: 77.7
Discharge Rate: 25C
Discharge Plug: XT60


ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer or Charger with Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 3C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts

jxs 10/19/15

See Tower Catalog page 54.
Parts Compatibility
‐ Mailing Address ‐
‐ Additional Contact Information ‐