Pitts-Style Allows Engine to be Mounted On It Side and the Exhaust
is Directed Out the Bottom of the Cowling.
Machined from Aluminum Stock with All Joints and Seams Being Press-
Fitted and Brazed for Reliability.
Large Volume Canister.
Low Exhaust Noise Level Similar to a 4-Stroke Sound.
One SuperTigre G2300 Pitts Muffler w/Pressure Fitting
Use The Muffler Mounting Screws That Came With The Engine. Nuts Are
Not Necessary For This Muffler.
Length of Main Canister: 4-1/2"
Width from Exhaust Flange to Outside Edge of Canister: 1-5/8"
Width of Canister: 1-3/16"
Degree of Sweep to the Rear: 25°
Length of Exhaust Tubes: 3"
The Exhaust Pipes Can Be Cut Shorter to Match Cowlings.