Master Airscrew Injection Molded Fiberglass Filled Nylon Propellers are|
Excellent for any Type of Application, from Training and
Sport Flying to Serious Competition.
Factory Balanced 3-Bladed Props have NACA airfoils and hold a
They have been accurately balanced and create a greater thrust
at a lower RPM.
This particular prop is glass-filled nylon as opposed to a wooden
One 12x6 glass-filled nylon 3-bladed propeller
The general rule for converting a 2 blade prop to a 3 blade is
subtract 1" from Diameter OR subtract 1 from the Pitch.
PER MASTER AIRSCREW: All 3- and 4- blades props are balanced dynamically at the
factory prior to drilling. The mounting holes are then drilled slightly off
center, if required, to properly balance the propeller. As such, your mounting
hole may be slightly off center. Master Airscrew assures us this is perfectly
normal and will not cause any problems during usage.