This is the radio controlled, electric powered, foam construction
GWS Slow Stick Airplane in Yellow with the 2215/12T Brushless Motor System.
For Beginning Modelers/Fliers.
FEATURES: Construction: Yellow colored foam wing and tail sections with
fiberglass fuselage tube
Wings: One piece, foam construction
Radio Component Placement: Servos, battery and ESC mount on fuse tube
Landing Gear: Main, 2mm diameter prebent wire, tail, 1mm diameter
prebent wire
Wheels: Two 2.9" (75mm) diameter main, 1" (25mm) tail wheel, plastic
ultra lightweight design
Hardware: Included
Motor: Brushless motor with motor mount, hardware, 10x6E
plastic prop and Black 1" (25mm) plastic spinner
Motor Mount: Plastic, part of gearbox attaches to fuselage tube with
epoxy
Warranty: GWS, guarantees this kit free from defects in both
materials and workmanship at the date of purchase
INCLUDES: Foam wing and tail sections, 2mm diameter wire main landing gear, 1mm
diameter tail gear, three ultra light wheels, GWS brushless motor
system 10x6 prop, spinner, decals, rubber bands, fiberglass
fuselage tube, hardware and instruction manual
REQUIRES: Speed Control: GWESC15A or 15A equivalent for brushless
motors
Battery: AA 8.4-9.6V 750mAh NiMH OR
7.4-11.1V 2S1P OR 3S1P 1300-2200 LiPo
Charger: Timed or peak for type of battery selected
Radio: 3-4 channel with two micro servos (1-elevator,
1-rudder)
Servo Extension 6": One (HCAM2000)
Building and field equipment
SPECS: Wingspan: 46.3" (1176mm)
Wing Area: 505.9 sq in (32.64 sq dm)
Weight: 15.87 - 21.16oz (450 - 600g)
Wing Loading: 4.5 - 6.0 oz/sq.ft (13.8 - 18.4 g/sq.dm)
Length: 37.6" (954mm)
Airfoil: Flat bottom, high wing placement
Center of Gravity: 3.7-4.1" (95-105mm) behind leading edge of wing
Control Throws-
Elevator: Up & Down 15-20°
Rudder: Right & Left 25-35°
jxs 07/01/10
ir/jxs
| 
Primary Accessories
Primary Accessories
