This is the 2.4GHz S-FHSS Futaba 4PL 4-Channel Surface Radio System.
          Transmitter and R2104GF Receiver only, servos not included.

FEATURES: Selectable between the high 6.8ms frame rate of the S-FHSS mode
            for use with the included receiver, or FHSS mode for use with
            R603GF or R2004GF receivers
          In addition to a faster frame rate which results in faster response,
            S-FHSS also offers fail-safe on all channels
          Forty model memory and 10 character naming
          Throttle fail-safe on FHSS mode
          MC Link (connecting to Futaba ESCs)
          4WS/Dual ESC/Boat/Brake Mixing
          Mechanical ATL, ABS braking and throttle acceleration
          Backlit 128x64 LCD with adjustable contrast
          Timer functions include Up, Down and Lap timer, Lap Memory up to 100
            Laps and Total Laps
          Third Channel Functions;
            Reverse                 Sub Trim
            Step                    Brake
            EPA (high/low)          A.B.S.
          Throttle Functions;
            Trim                    Sub Trim
            Trim Rate               A.B.S
            Reverse                 Idle-Up
            EPA (high/low)          Acceleration
            ATL                     Preset (throttle hold)
            Mechanical ATL          Speed
            Exponential (high/low)  Servo Neutral Select
          Steering Functions;
            Trim                    EPA (left/right)
            Trim Rate               Exponential
            Reverse                 Sub Trim
            Dual Rate               Speed Turn/Return
          Fourth Channel Functions;
            Reverse                 Brake
            EPA (high/low)          ABS
            Sub Trim
          Other Mixing Functions;
            One Program Mixing      Brake Mixing
            4WS Mixing              Special Mixing for Dual ESC Setup
          One year limited warranty through Hobby Services beginning at date of
            purchase

INCLUDES: Transmitter
          R2104GF 2.4G S-FHSS Receiver, FUTL7616
          On/Off Switch and Instruction Manual

REQUIRES: AA Cells: Four for transmitter
          Servos of modeler's choice

SPECS:    Receiver;
            Voltage: 3.5V-8.4V
            Dimensions: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)

COMMENTS: If wanting a LiFe battery for the transmitter, the Hobbico LiFe 6.6V
            1900mAh 2 Cell Battery Pack (HCAM6520) is an ideal choice.

         WHILE THIS TRANSMITTER COMES WITH A CHARGE PLUG BUILT IN, IT
         CANNOT BE USED UNLESS YOU USE PART NUMBER HSP29615 AND A CHARGER
         THAT CAN HAVE THE CHARGE CURRENT ADJUSTED TO 4.8 VOLTS AT 200 MAH.

                                                                   jxs 12/01/10
                                                                         ir/jxs
                                                                  updt 12/23/10
                                                              updt jxs 12/05/11