This is the 1/10 scale electric powered, radio controlled, Ready To Run
DuraTrax Evader EXT2 Off-Road Stadium Truck.
FEATURES: Chassis: Composite tub
Drive: Rear wheel shaft type
Ball Bearings: Full set, 14 total
Motor: DuraTrax Photon Speed 2
Radio: 2-channel Tactic pistol grip 27MHz AM, with steering and
throttle trim and reverse, (transmitter does not have charge jack)
TSX200 steering servo
Electronic Speed Control: DuraTrax Sprint with reverse, Evader DT
ESC mount
Body: Trimmed and painted stadium truck
Shocks: Oil-filled, plastic body with metal shock caps
Gearbox: Closed rear
Differential: Gear type
Transmission: Single speed with metal idler gear
Slipper Clutch: Adjustable, matches power delivery to the track
surface, for better traction and speed. Protected from debris by
a cover, and has a removeable cap for easy access for adjustments.
Tires: All terrain, treaded 3.8" (94.5mm) diameter, 2" (51mm) wide
Wheels: Nylon construction, black in color, six split spokes, 2.2"
(56mm) diameter, 2" (51mm) wide
Battery Strap: newly designed to accept a 2S LiPo battery
Spur Gear: Nylon 88 tooth, 48 pitch
Pinion Gear: Steel 20 tooth, 48 pitch
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Suspension: Adjustable, includes steel turnbuckles that are
factory-set, but adjustable to various driving conditions
Steering: Bell-crank type with servo saver
One-year Stress-Tech free replacement guarantee (see comments)
Warranty Period: 90 day limited beginning at date of purchase
INCLUDES: DuraTrax Evader EXT2 assembled Stadium Truck with motor, radio, ESC,
full ball bearings, decal sheet, painted body and manual
REQUIRES: AA Batteries: 8 for radio transmitter
Battery: 6-or 7-cell stick pack with standard connector (if using a
7-cell, remove foam battery spacer block under the ESC)
OR 2S LiPo pack (Low Voltage Cutoff strongly recommended
if using LiPos)
Charger: AC/DC Timed or Peak for 6-cell battery
Misc. Items: Track equipment
SPECS: Vehicle-
Length: 16.1" (409mm)
Width: 12.9" (327mm)
Height: 6.6" (168mm)
Weight: 3.6lb (1.63kg)
Wheelbase: 11.6" (294mm)
Front Tread: 11.5" (292mm)
Rear Tread: 11" (279mm) wheels on-center side-to-side
Front Track: 12.4" (314mm)
Rear Track: 12.8" (325mm) wheels at outer edges
Ground Clearance: 1.4" (36mm)
Body-
Length: 15.3" (390mm)
Width: 6" (152mm) at front wheels, narrowest point
Width: 6.7" (170mm) at rear wheels, widest point
Height: 4" (103mm)
COMMENTS: The DuraTrax Evader EXT is available with the following radio
channels and body colors;
A1 Black, DTXD32A1 A3 Red, DTXD32A3
A2 Blue, DTXD32A2 A4 Yellow, DTXD32A4
If a replacement steering servo is needed, order the Hobbico High
Torque Servo, HCAM0165, or the Duratrax SX200 High Torque Servo,
DTXM3301
For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Rear Hubs 2 DTXC1535
4 3/16x3/8" Front Hubs 2 DTXC1423
2 5x10mm Top Shaft 1 DTXC1535
2 5x11mm Idler Gear 1 DTXC1547
2 10x15mm Diff Gear 1 DTXC1595
Stress-Tech Free Replacement Parts Guarantee-
"DuraTrax is so confident in the quality and durability of
Stress-Tech plastic parts that they will replace any Stress-Tech
part that breaks during the first 12 months you own your DuraTrax
Evader ST RTR. Just send the broken part to DuraTrax and they
will send you a FREE replacement. See the instruction manual
for mailing address and details." Note: This warranty is ONLY
available directly from DuraTrax. It is not available from place
of purchase.
jxs 08/09/10
ir/jxs
| 
Eligible: Yours for 3
Primary Accessories
Primary Accessories
