This is the electric powered, radio controlled, almost ready to fly
             ElectriFly Edge 540 3D Indoor Aerobatic Airplane.
                     Park Pilot Program Legal Aircraft

FEATURES: Construction: 0.12" (3mm) thick extruded polystyrene Pro-Formance
            foam with carbon fiber rods for support, all flight surfaces are
            beveled for maximum deflection and pre-hinged with 3M Blenderm tape
            for strength
          Landing Gear: Two-piece straight rods with flat foam wheel pants
          Wheels: Two foam 1" (26.4mm) diameter
          Hardware: Full set included
          Building Time: Approximately 2-4 hours
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            date of purchase. This warranty does not cover any component parts
            damaged by use or modification

INCLUDES: ElectriFly ARF Edge 540 3D Aerobatic Airplane, landing gear, wheels,
            hardware and photo-illustrated instruction manual

REQUIRES: Radio: 4-channel
          Servos: 3-micro high torque
            Indoor Operation;
          Motor: Rimfire 250 Brushless Outrunner, GPMG4502
          Battery: 2S LiPo at least 300mAh, GPMP0700
            Outdoor Operation:
          Motor: Rimfire 300 Brushless Outrunner, GPMG4505
          Battery: 3S LiPo 11.1V at least 300mAh GPMP0701

          ESC: Indoor: 8A for Brushless Motors: GPMM1800
              Outdoor: 10A
          Cell Balancer: For LiPo battery, GPMM3160
          Battery Charger: LiPo compatible
          Propeller: 8x4E for 3D/Sport setup
          Building and field equipment

SPECS:    Wingspan: 32" (815mm)
          Wing Area: 274 sq in (17.7 sq dm)
          Weight: 6 - 6.3oz (170 - 180g)
          Wing Loading: 3.2 - 3.3oz/sq ft (9.8 - 10g/sq dm)
          Length: 35" (890mm)
          Center of Gravity: 5/8" (15mm) back from the carbon strip in the
            wing on both sides of the fuselage +/- 1/4" (6mm)
          Control Throws-
                        Low Rate         High Rate           3D
          Elevator:   1" (25mm) 17°    1-3/4" (44mm) 30°   2-3/4" (70mm) 53°
          Rudder:     2" (51mm) 25°    2-3/4" (70mm) 35°   3-3/4" (95mm) 52°
          Ailerons:   1" (25mm) 14°    1-5/8" (41mm) 23°   4" (102mm) 79°

                                                                   jml 07.27.12
                                                                      GX7/27/10
                                                                         ir/jxs