Cars & Trucks > Car & Truck R/C - Nitro-Powered > Truck R/C Ready-to-Run Nitro-Powered Bookmark this Page

Traxxas - TRAD10LR TRA5907 5907 020334590701 0020334590701
Manufacturer Stock#
A Closer Look at This Product
  Tech Notes

Accessories Needed

Replacement & Optional Parts

Easy RC: Cars & Trucks

Browse Traxxas

Traxxas Slayer Pro 4X4 Nitro TQi/2.4GHz RTR #47
Click for parts for this item
Traxxas Slayer Pro 4X4 Nitro TQi/2.4GHz RTR #47
View Larger Picture

Stock Number
Stock Status

Color Availability
Move your mouse over the listed colors to view pictures. Click any listed color for product details.
Colors for Traxxas Slayer Pro 4X4 Nitro TQi/2.4GHz RTR #47
Out of Stock: Black/Red, Black/Silver, Red/Black and Silver/Black

Product Image

Tech Notes
This is the glow powered, 2.4GHz radio controlled,
Traxxas Slayer Pro 4WD Short Course Race Truck.


Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
semi-monocoque with integrated roll hoop and carry handle
Drive: Four wheel
Drive Type: Shaft driven, shafts are .71" (18mm) diameter with
half shafts and rubber shielded stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
carburetor and high flow dual stage air filter with 60% more peak
horsepower than the TRX 2.5 engine, EZ-Start electric starter and
7.2V battery
Exhaust: Polished resonator dual chamber aluminum tuned pipe
Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
Radio: Traxxas TQi 2.4GHz high output with Traxxas Link automatic
model recognition, telemetry enabled 5-ch micro receiver with dual
channel 1 inputs, see COMMENTS below...
Clutch: Two shoe composite construction
Transmission: Auto shifting wide ratio two speed, forward only
Ball Bearings: Full set included, rubber sealed bearings used in all
exposed locations
Shocks: 4 GTR inboard mounted, maintenance free, silicone oil-filled
hard anodized bodies with TiN shafts
Main Gear: 38 tooth, molded plastic
Gearbox: Sealed front and rear
Bumpers: Flexible molded front and rear tube style
Suspension: Linkage based for long travel and precise tuning
adjustments and control
Differentials: Maintenance free, sealed with silicone X-rings and
gaskets, limited slip action can be tuned using different viscosity
Brakes: Alloy calipers, giant 1.6" (40mm) diameter drilled and vented
steel rotor and semi-metallic friction material
Tires: BF Goodrich Multi terrain, soft compound rubber
1.6" (42mm) wide, 4.3"
(109mm) diameter with foam inserts
Wheels: Beadlock design 5-spoke satin chrome finish, 2.2" (56mm)
outer diameter, 3" (76mm) inner diameter, 1.6" (41mm) wide
Body: Traxxas ProGraphix pre-painted and trimmed with decals applied
Bumpers: Front and rear, plastic construction
Suspension: Variable progressive two rocker design, suspension travel
not limited to length of shocks, ride height, suspension travel
and progressive rate can be adjusted totally independent of each
other, rubber sealed pivot balls can be adjusted with included tool
without removing seals, steel pivot ball retaining rings
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when when viewed from front or behind vehicle
Steering: Ball bearing enhanced with twin high-torque servos driving
a heavy-duty servo saver
Warranty: 30 day warranty on electronic components
Chassis and engine are warranted free from defects at the date of
purchase before use. No warranties are expressed or implied that
cover damage caused by normal use or wear, or cover or imply
how long any chassis or engine part will last before requiring
replacement due to wear.


Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
digital ball bearing steering servo, one standard servo, 15T clutch
bell, 38T spur gear, tool set, illustrated manual, decals, two air
filter elements, filter oil, engine setup DVD, long travel rocker
and spring set, 7.2V battery, wall charger, extra glow plug and
fuel bottle


Fuel: Traxxas 10%-20% Top Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver


Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78lb (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) outer edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Gear Ratio (1st Gear): 15.75:1
Gear Ratio (2nd Gear): 10.05:1
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, widest point
Height: 5.5" (139mm)


#6510 Docking Base TRAL6510 (not included) enables model
to be tuned from an iPhone or iPod Touch (Traxxas Link App must be
downloaded if wanting to use an iPhone or iPod Touch)

The Slayer Pro 2.4GHz is available in the following body colors;
TRAD10LR Black/Red Mike Jenkins
TRAD10LS Black/Silver Greg Adler
TRAD10RL Red/Black Mark Jenkins
TRAD10SL Silver/Black Douglas/Oberg

All original bearings used in the Slayer Pro are rubber shielded.
The following list includes the rubber shielded bearings and the
non-shielded DuraTrax brand as an economical alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas
Qty. Size Location Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Rear Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611

jxs 7/07/10

– If you need more information, use these Traxxas resources –
Web Site:
Phone: 888-872-9927
  Postal Address:

Click here for Units of Measure Conversion Calculators

Accessories Needed
This is the 2.4GHz radio controlled Traxxas Slayer Pro 4WD SC Race Truck. FEATURES: Revo spec variable progressive two rocker suspension design, .20 cu in (3.3CC) engine, EZ-Start electric starter, GTR inboard mounted shocks, TQi 2.4GHz radio, battery, wall charger, fuel bottle, extra glow plug REQUIRES: 8 AA batteries, 10%-20% glow fuel, building & track equip.

Accessories for the Traxxas Slayer Pro 4X4 Nitro TQi/2.4GHz RTR #47

Primary Accessories   Building & Field Equipment Optional Accessories
  Special Stock Number Product Description Parts Saver Eligible Tower's
Low Price
Click to Order Quantity Needed In Cart? Stock
 LXDHJE Duratrax Onyx AA Alkaline Battery (8)
Qty Discount Available
5.49   In Stock
 LXRXC9 Tower Hobbies TOWER Power 20% Car Fuel Quart
Qty Discount Available
10.69   In Stock
Subtotal for this Group of Accessories: 16.18  
Click to Order all items listed in this Group of Accessories    Buy This group of Accessories

Primary Accessories   Building & Field Equipment Optional Accessories

Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
See Tower Hobbies Reviews at
Hobbico, Hobby & Model Construction Supplies - Retail, Champaign, IL
We accept the following: We accept the following payment methods: Discover, MasterCard, Visa, American Express, Diners Club International, JCB, China UnionPay, PayPal, and PayPal Credit.
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change. Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.
Copyright © Tower Hobbies All rights reserved. Do not duplicate or redistribute in any form.