This is the ElectriFly Rimfire 150 14-05-3000 Outrunner Brushless Motor.

FEATURES: Designed for Sport airplanes up to 2.3oz (65g) and 3D airplanes up
            to 1.4oz (40g)
          Ideal for use with 6A Brushless ESC's, 7.4v LiPo packs and 5x4.3
            GWS electric props
          Lightened aluminum motor can with high-torque, rare-earth Neodymium
            magnets
          Double-shielded ball bearings
          Maintenance free-no commutators or brushes to change

INCLUDES: ElectriFly Rimfire 150 14-05-3000 Motor with mount, convertible prop
            adapter/prop saver, 3-pin female connector with heat-shrink tubing,
            pre-installed male 3-pin micro connector, O-Ring and hex wrench

REQUIRES: Installing in airplane and connecting to ESC

SPECS:    Motor Diameter: 0.55" (14mm)
          Overall Length: 0.63" (15.9mm)
          Kv: 3000
          Burst Watts: 24 watts
          Weight: 0.20oz (5.6g) motor only, 0.25oz (7.1g) motor, mount & prop
            adapter
          Shaft Diameter: 0.059" (1.5mm)
          Input Voltage: 7.4v (2S LiPo)

                                                                   jxs 02/03/11
                                                                         ir/jxs