This is the electric powered, radio controlled,
             Thunder Tiger Mini Titan E325 Pro 3D Helicopter Kit.
             This version requires Radio, Gyro, Motor and Battery.
              For RC Helicopter Pilots 14 Years of Age and Older.

FEATURES: Control System: 120° eCCPM, utilizing three servos working together
            for the main control of the aileron, elevator and collective pitch,
            bell-hiller mixing ratio can be changed for different flying styles
          Main Frame: Molded lightweight one-piece
          Tail Assembly: Belt driven-tail autorotation with precise tail pitch
            control system, entire tail assembly detaches for easy packing and
            storage
          Main Blades: Wooden, 12.4" (315mm) in length, main rotor grips have
            two radial bearings and a thrust bearing
          Battery Tray: Molded plastic, high positioned for better aerobatics
          Body: Molded plastic, white in color with carbon fiber look canopy
          Landing Gear: Molded one-piece
          Main Gear: Plastic construction, 150 tooth

INCLUDES: ARF Thunder Tiger Mini Titan E325 Pro 3D Heli, with Main Blades,
            Canopy, Body, Foam Blade Holders, Decal Sheet
            and Instruction Manual

REQUIRES: Radio System: 6ch heli with receiver, three mini standard servos, one
            high-torque mini rudder servo
          Battery: 11.1V LiPo, at least 2000mAh (GPMP0406) NOTE if using this
            battery, cut the bullet connectors from the ESC and solder on
            Dean's Ultra Male connectors (WSDM1302) to mate with this battery
          Motor: Thunder Tiger OBL 29/35-10H brushless outrunner
          ESC: 40A
          Gyro: Heading lock
          Battery Charger: LiPo compatible
          Building and field equipment

SPECS:    Fuselage Length: 25.74" (654mm)
          Fuselage Width: 4.72" (120mm)
          Total Height: 8.3" (210mm)
          Main Rotor Diameter: 28.66" (728mm), 29.45" (748mm)
          Tail Rotor Diameter: 6.14" (156mm)
          Gear Ratio: 1:10:4.4 / 1:11.5 : 4.4 / 1:15:4.4
          Weight: 26.5oz (750g)

COMMENTS: For Replacement Ball Bearings use:
            Qty.    Size          Location                 Qty.   Bearing
             2     2x5mm         Main Rotor Hub             1    TTRE6544
             2     2x5mm         Mixing Lever               1    TTRE6544
             2     4x9mm Thrust  Main Rotor Pitch Housing   1    HPIC8934
             2     4x8mm         Main Rotor Pitch Housing   1    DTXC1511
             1     5x11mm        Upper Bearing Housing      1    DTXC1547
             1     5x11mm        Main Shaft                 1    DTXC1547
             2     3x8mm         Tail Rotor Shaft           1    TTRC6003
             2     4x8mm         Tail Pitch Housing         2    DTXC1511
             2     2x5mm         Tail Pitch Housing         1    TTRE6544

                                                                   jxs 09/08/10
                                                                         ir/jxs