This is the electric powered, radio controlled,
   Thunder Tiger Mini Titan E325 SE 3D Helicopter Kit w/Carbon Fiber Blades.
                     This version includes Motor and ESC.
              For RC Helicopter Pilots 14 Years of Age and Older.

FEATURES: Control System: 120° eCCPM, utilizing three servos working together
            for the main control of the aileron, elevator and collective pitch,
            bell-hiller mixing ratio can be changed for different flying styles
          Rotor Head: Full metal CNC construction
          Main Frame: Molded lightweight one-piece
          Motor: Thunder Tiger OBL 29/37-10H brushless outrunner
          ESC: 40A
          Tail Boom: Carbon
          Tail Assembly: Belt driven with metal tail drive gears and pulleys
            combined for improved tail rotor control, push-pull linkage
          Main Blades: Carbon fiber 12.8" (325mm) in length, main rotor grips
            have two radial bearings and a thrust bearing
          Battery Tray: Molded plastic, high positioned for better aerobatics
          Body: Molded plastic, white in color with carbon fiber look canopy
            and metal canopy retaining posts
          Landing Gear: Molded one-piece, black in color
          Main Gear: Plastic construction, 150 tooth

INCLUDES: ARF Thunder Tiger Mini Titan E325 SE 3D Heli, with CF Main Blades,
            Canopy, Body, Foam Blade Holder, Decal Sheet, Motor, ESC and
            Instruction Manual

REQUIRES: Radio System: 6ch heli with receiver, three mini standard servos, one
            high-torque mini rudder servo
          Battery: 11.1V LiPo, at least 2000mAh (GPMP0406) NOTE if using this
            battery, cut the bullet connectors from the ESC and solder on
            Dean's Ultra Male connectors (WSDM1302) to mate with this battery
          Gyro: Heading lock
          Battery Charger: LiPo compatible
          Building and field equipment

SPECS:    Fuselage Length: 25.74" (654mm)
          Fuselage Width: 4.72" (120mm)
          Total Height: 8.3" (210mm)
          Main Rotor Diameter: 28.66" (728mm), 29.45" (748mm)
          Tail Rotor Diameter: 6.14" (156mm)
          Gear Ratio: 1:11.5:4.4
          Weight: 30.6oz (870g)

COMMENTS: For Replacement Ball Bearings use:
            Qty.    Size          Location                 Qty.   Bearing
             1     5x11mm        Upper Bearing Housing      1     DTXC1547
             1     5x11mm        Main Shaft                 1     DTXC1547
             2     3x8mm         Tail Rotor Shaft           1     TTRE6541
             2     2x5mm         Tail Unit                  Not Carried

                                                                   jxs 12/06/10
                                                                         ir/jxs