This is the Thunder Tiger Ripper OBL 29/37-10H
                     Series Outrunner Brushless Motor.

FEATURES: Stong magnets for high output torque and high temperature rating
          Dual ball bearings shaft support
          Cooling mechanical design that allows you to get the
            most efficiency out of the motor
          18 month warranty

INCLUDES: One Thunder Tiger Ripper OBL 29/37-10H outrunner brushless motor
          Three 3.5mm male bullet connectors
          Three 3.5mm female bullet connectors
          Heat shrink for all bullet connectors
          Screw set with 4 screws
          One 2.5mm hex wrench

REQUIRES: Installation of motor
          Soldering the bullet connectors to the motor wire

SPECS:    Motor Diameter: 1.12" (28.5mm)
          Motor Length:   1.18" (30mm)
          Shaft Diameter: 1/8" (3.2mm)
          Shaft Length:   1.65" (42mm)
          kV Rating: 3700 rpm/V
          Weight: 2.33oz (66g)
          Input Voltage: 11.1V (3S LiPo)
          Max Constant Current: 35A
          Max Surge Current: 40A/60s
          Internal Resistance: 27 milli-ohms

COMMENTS: Best used with a micro heli with a 3S LiPo setup
          Works with E325 Thunder Tiger Helis

                                                                     JAW 2/4/11
                                                                         ir/jxs