This is the glow powered, Thunder Tiger Raptor 50 Titan SE R 3D Helicopter Kit
                           with Yellow Color Scheme.
       For Advanced to Expert Helicopter Pilots 14 Year of Age and Older.

FEATURES: Control System: 90° Collective Cyclic Pitch Mixing with new design
            for main rotor hub and mixing lever that delivers +/-15° collective
            pitch for very fast pitch response
          Autorotation Gear: Constant drive design allows aerobatics during
            autorotation
          Flapping Damper: Nonlinear for aggressive 3D flying
          Tail Drive: Belt type with metal guide pulleys on body and tail
          Tail Boom: Aluminum
          Body: FRP construction, painted, with decals applied, carbon fiber
            look canopy area
          Tail Rotor Blades: White plastic
          Vertical Fin: 3D design, constructed of carbon
          Aileron and Elevator Linkage: Push-pull
          Landing Gear: Nylon with aluminum skids
          Fuel Tank: 11.5oz (340cc)

INCLUDES: Thunder Tiger Raptor 50 Titan SE R 3D Helicopter Kit with Body,
            Landing Gear, Fuel Tank and Instruction Manual

REQUIRES: Radio: At least 6-channel
          Servos: Four standard with digital rudder servo
          Gyro: Heading lock
          Flight Battery: 4.8V NiMH, at least 1200mAh
          Engine: .50 cu in heli type
          Exhaust: High-flow 3D type
          Main Blades: Carbon or fiberglass recommended
          Glow Fuel: Heli blend 15-30% nitro content
          Starting Shaft: 6mm hex size
          Flight Battery: 4.8V 1200mAh NiMH
          Electric Starter: 12V .90 size
          Remote Glow Starter
          Building and field equipment

SPECS:    Fuselage Length: 48.03" (1220mm)
          Fuselage Width: 5.51" (140mm)
          Total Height: 15.75" (400mm)
          Main Rotor Diameter: 54.53" (1385mm)
          Tail Rotor Diameter: 9.33" (237mm)
          Gear Ratio: 8.5:1:4.56
          Fully Equipped Weight: 7.5lbs (3400g)

COMMENTS: For Replacement Ball Bearings use:
            Qty.    Size          Location                 Qty.   Bearing
             2     8x12mm        R& L Elevator Subassembly  1    DTXC1581
             2     4x8mm         Elevator Push/Pull         1    DTXC1511
             4     6x13mm        Rotor Shaft                2    DTXC1573
             4     5x10mm        Tail Rotor Hub             2    DTXC1535
             2     4x7mm         Tail Pitch Control Lever   2    DTXC1507
             4     4x7mm         Flybar Assembly            2    DTXC1507
             1     5x11mm        Tail Idle Pulley           1    DTXC1547
             1     4x7mm         Pitch Push-Pull Lever      1    DTXC1507

                                                                   jxs 10/07/10
                                                                         ir/jxs