This is the radio controlled, electric powered, 1/8 scale
              Ultra GTP2 On-Road Rolling Chassis Sedan from Ofna.

FEATURES: Chassis: Hard anodized aluminum 0.12" (3mm) thick
          Drive: Four wheel shaft
          Differentials: Bevel gear type
          Shocks: Hard coated, 13mm, oil filled
          Shock Towers: 0.12" (3mm) thick 6061 aluminum
          Ball Bearings: 18, sealed
          Tires: Racing type 1.57" (40mm) wide, 4.52" (115mm) outer diameter
            with foam inserts
          Wheels: White plastic construction 3.2" (82mm) diameter, 1.6"
            (42mm) width, 17mm hex
          Suspension: Pivot ball with front and rear sway bars, independent
            rear suspension
          Pinion Gear: 13 tooth
          Spur Gear: 51 tooth composite
          Bumper: Front foam
          Body: Clear Protoform DP8 sedan
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle

INCLUDES: Ofna Ultra GTP2 On-Road Rolling Chassis, unpainted body, tires, foam
            inserts, tires, 13 tooth pinion gear, 51 tooth spur gear, decals
            and instruction manual

REQUIRES: Radio: 2-channel with standard size high-torque servo
          AA Batteries: 8 for transmitter
          Motor: Ofna recommends the Mamba Monster 2650kV Brushless Power
            System, CSEC6202 which includes the Neu-Castle 2650 KV motor and
            the Mamba Monster ESC
          Paint, tools and track equipment

SPECS:      Vehicle-
          Length: 18"    (457mm)
          Width:   7.8"  (198mm) measured at chassis side guards
            Body-
          Length: 23.25" (590mm)
          Width:  12.6"  (320mm)
          Height:  5.5"  (140mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty   Size     Location                 Qty   Bearing Set
             4  7x19mm     F & R Diffs               2     DTXC1579
             2  7x19mm     Center Diff               1     DTXC1579
             2  6x13mm     Front Gear Case           1     DTXC1573
             4  8X16mm     Knuckle Arms              2     DTXC1585
             2  6x13mm     Rear Gear Case            1     DTXC1573
             4  8X16mm     Rear Wheel Hubs           2     DTXC1585

                                                                   jxs 09/22/10
                                                                         ir/jxs