This is the FlightPower Pro50 3600mAh 3S 11.1V LiPo Battery.
FEATURES: Enormous 50C continuous discharge currents and 100C burst currents
provide massive power for brushless motors used in large-scale
aircraft and 3D performance models
INCLUDES: FlightPower Pro50 3600mAh 3S 11.1V LiPo Battery with Deans Ultra Plug
FlightPower Balance Connector and Instruction Sheet
REQUIRES: Cell Balancer, GPMM3160 with 3S Adapter GPMM3181
LiPo Compatible Charger, TRITON2
LiPo Charging Bag, GPMP0751
SPECS: Dimensions: 5.28 x 1.57 x 1.24" (134 x 40 x 31.5mm)
Weight: 11.8oz (336g)
Power Rating: 40.0W
Max. Charge Current (6C): 21.6A*
Max. Continuous Discharge Current (50C): 180A
Balancing Connector: FlightPower balancing plug
Output Connector: Deans Ultra Female
Wire Type: Multi-strand copper w/high-temperature silicone-rubber
insulation
*Do NOT attempt to charge batteries at the maximum rated charge
current UNLESS using an approved LiPo charger with balancing
function, or LiPo charger and balancer combination. Charging at 1C
charge currents with an approved LiPo charger and/or balancer
combination is otherwise recommended.
COMMENTS: ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER allow LiPo cells to exceed 140°F (60°C) during charging
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of the reach of children
jxs 12/30/10
ir/jxs
updt jxs 01/27/11