This is the electric powered 1/10 scale, ready to run
                XB Sport Mercedes 190E On-Road Car from Tamiya.

FEATURES: Chassis: TT-01 type ES, streamlined version of the TT-01 type E
            chassis-compatible with a variety of Tamiya Option Parts
          Drive: Four wheel shaft drive
          Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541
          Radio: 2-channel pistol grip 27MHz Tamiya Adspec AM, standard size
            and torque steering servo
          Motor: 540 motor with pre-attached leads
          Ball Bearings: Installed in differentials, bushings in wheel hubs
          Shocks: Friction, plastic body
          Gearbox: Sealed, front and rear
          Differentials: Bevel gear, ball bearing equipped
          Transmission: Single speed
          Body: Painted black and trimmed with mirrors, rear wing
          Tires: Treaded 0.94" (24mm) wide, 2.6" (65.5mm) diameter
          Wheels: 6-spoke gray 2.0" (52mm) outer diameter, 0.94" (24mm) wide
          Bumper: Front foam
          Suspension: Independent double wishbone
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Non-adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Steering: Bell-crank type with servo saver

INCLUDES: Tamiya RTR XBS Mercedes 190E On-Road Car, 540 motor, ESC, painted
            and trimmed body, tires, foam bumper, wheels, 19 tooth pinion gear,
            61 tooth spur gear, decals, and AM radio

REQUIRES: AA Batteries: 8 for transmitter
          Battery: 6-cell stick pack with standard connector
          Charger: AC/DC timed or peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:    15.7" (400mm)
          Width:      7.2" (183mm)
          Height:     5.5" (140mm)
          Wheelbase: 10.1" (257mm)
             BODY-
          Length:    17"   (432mm)
          Width:      6.4" (163mm)
          Height:     4.4" (111mm)

COMMENTS: For replacement, or to upgrade to Ball Bearings use:
            Qty.  Size       Location              Qty.    Bearing Set
             2   5x11mm     Front Hubs              1       DTXC1547
             2   5x11mm     Rear Hubs               1       DTXC1547
             2   8x12mm     Front Diff              1       DTXC1581
             2   8x12mm     Rear Diff               1       DTXC1581
             2   5x11mm     Fr Driveshaft Joint     1       DTXC1547
             2   5x11mm     Rear Driveshaft Joint   1       DTXC1547

          Body shown in box is painted black.

                                                                   jxs 12/08/10
                                                                         ir/jxs