This is Master Airscrew's injection-molded Fiberglass-Filled 16x10 3-Blade
      Nylon Pusher Propeller. This is suitable for any application from
               training and sport flying to serious competition.

FEATURES: Factory-balanced 3-blade prop has NACA airfoils and holds true pitch.
          Accurately balanced to create a greater thrust at lower RPM
          Prop is glass-filled nylon as opposed to a wooden prop.

INCLUDES: One 16x10 glass-filled nylon 3-bladed pusher propeller.

SPECS:    Diameter: 16"
          Pitch:  10"

COMMENTS: The general rule for converting a 2 blade prop to a 3 blade is
            subtract 1" from Diameter OR subtract 1 from the Pitch.

PER MASTER AIRSCREW: All 3- and 4- blades props are balanced dynamically at the
factory prior to drilling. The mounting holes are then drilled slightly off
center, if required, to properly balance the propeller. As such, your mounting
hole may be slightly off center. Master Airscrew assures us this is perfectly
normal and will not cause any problems during usage.
                                                                   cmc 11/07/02
                                                                         ir/jxs