Futaba 6J 6-Channel S-FHSS System

Tower Stock# LXARLD  •  Manufacturer Stock# FUTK6000
  • front/side (see larger view)
  • rear/side (see larger view)
Tech Notices:Notice 1
Easy Pay
Request 3 Payments ($55.01, $54.99, $54.99) Details
Notes from our tech department:
This is the Futaba 6J 6-Channel 2.4GHz
S-FHSS and FHSS Selectable Mode Radio System.
This version does not include servos.
The 6J transmitter is "full range".
Only available in Mode 2.
(See COMMENTS for optional battery and charger choices)

FEATURES

Selectable S-FHSS and FHSS modes, the included R2006GS receiver
automatically adapts to the selected mode
Capable of 4 channels only in FHSS mode
Fail safe on all channels in S-FHSS mode only (throttle channel only
when FHSS mode is selected)
15 model memory with 4 character model naming
40x40 127 segment LCD display
Modes 1-4 selectable by pilot
R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link
circuitry, frequency hopping, spread spectrum design and Dual
Antenna Diversity
Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
Throttle position, mix and low battery warnings
Trainer system (trainer cord not included)
One year limited warranty through Hobby Services beginning at date of
purchase
Airplane Features;
Two programmable mixes and two 5-point throttle curves
Two 5-point pitch curves
Flaperon with differential rate
Flap trim (2 rates)
V-tail mixing
Elevon mixing
Helicopter Features;
Two 5-point throttle curves
Three 5-point pitch curves
Throttle hold
Hover pitch
Gyro and revo mixing
Four swash plate types (H1, H3, HR3 & H3 w/AFR)
Swash AFR (ail/ele/pitch)
Throttle mix
Electronic swash ring
Throttle and pitch delay

INCLUDES

Futaba 6J 6-Channel Transmitter, R2006GS Receiver, Instruction
Manual, Neckstrap and Smooth Ratchet Plate for Heli Throttle

REQUIREMENTS

AA Cells: Four for transmitter
Servos of modeler's choice
Receiver battery
(See COMMENTS for optional battery and charger choices)

SPECIFICATIONS

Transmitter;
Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
Frame Rate: 6.8ms
Current Drain: 170mA
Receiver;
Modes: FHSS or S-FHSS (auto selectable)
Power Requirements: 4.8V-7.4V
Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)
Weight: 0.29oz (8.3g)
Current Drain: 80mA (@ no signal)

COMMENTS

You may also use a 2C 6.6V LiFe battery such as HCAM6521
jxs 02/28/11
ir/jxs
updt jxs 12/05/11
updt JMLM 10/28/14

Resources
See Tower Catalog page 155.
Easy RC: Radio Systems
Review #1
Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info