This is the radio controlled glow or electric powered, almost ready to fly
                 Razor 3D .46/EP Aerobat from Tower Hobbies.
                    For modelers 14 years of age and older.

FEATURES: Construction: Balsa and plywood
          Wings: One piece, attaches to fuselage with 1/4-20 nylon wing bolt
          Aileron Control: Dual servo
          Covering: Top Flite MonoKote
          Spinner: 2.5" (63.5mm) diameter, blue in color
          Cowl: Painted fiberglass
          Landing Gear: Painted composite
          Wheels: Foam, main 2.2" (56mm) diameter, 0.90" (23mm) tailwheel
          Wheel Pants: Painted fiberglass
          Fuel Tank: 8.8oz (260cc)
          Engine Mount: Two-piece composite
          Warranty: Tower Hobbies guarantees this kit to be free from defects
            in both materials and workmanship at the date of purchase. This
            warranty does not cover any component parts damaged by use or
            modification.

INCLUDES: ARF Razor 3D .46/EP Airplane with Fuel Tank, Landing Gear, Wheels,
            Engine Mount, Prebuilt and Covered Wing, Fuselage and Tail Sections
            Decals and Instructions

REQUIRES: Radio: At least 4 channels
          Servos: 4 standard size & torque, 5 if using glow engine
          Receiver Pack: 4-cell 4.8V 2000mAh recommended
          12" (305mm) Servo Extensions: Two for aileron servos
          24" (610mm) Servo Extensions: Tow for elevator and rudder servos
          Y-Harness: For aileron servos, if using a radio without mixing
            Glow Power-
          Engine: .46-.55 2-stroke OR .70-.81 cu in 4-stroke
             Glow fuel and Propeller

            Electric Power-
          Motor: Brushless outrunner
          Motor Mount
          ESC: 60A brushless compatible
          Propeller: 14x7 electric
          Battery:2 LiPo 11.1V 25C, at least 3350mAh wired in series
          Battery Charger: LiPo compatible
          Building and field equipment

SPECS:    Wingspan: 52" (1,320mm)
          Wing Area: 579 inē (37.3 dmē)
          Weight: 5-5.5lb (2,270-2,490g)
          Wing Loading: 20-22 oz/ftē (61-67 g/dmē)
          Length: 54.5" (1,385mm)
          Center of Gravity (CG): 5-1/8" (130mm) back from the leading edge of
            the wing measured at the fuselage
          Control Throws:  Low Rate          High Rate             3D
            Elevator:    1/2" (13mm)  7°    3/4" (19mm) 10°   2-1/2" (64mm) 37°
            Rudder:    1-3/16" (30mm) 11°   2"   (51mm) 19°   3-1/2" (89mm) 36°
            Ailerons:    3/8" (10mm)  7°    5/8" (16mm) 12°   1-3/4" (44mm) 34°

COMMENTS: Following are the Top Flite MonoKote colors used to cover this model
            and order numbers for 6' rolls;
            Jet White, TOPQ0204            Sky Blue, TOPQ0206
            Missile Red, TOPQ0201          Royal Blue, TOPQ0221

          If a replacement fuel tank is needed, order the DuBro 8oz (DUBQ0208)
            or the Sullivan 8oz slant fuel tank (SULQ1439). Some trimming and
            modification may be required.

                                                                   jxs 03/29/11
                                                                         ir/jxs