This is the TrakPower 2S 7.4V 50C 6200mAh Hard Case LiPo Battery
                         with Dean's Ultra Connector.

FEATURES: Ideal for 1/10 scale car applications
          ROAR approved
          Prewired with Dean's Ultra connector

INCLUDES: 2S 7.4V 50C 6200mAh LiPo Battery with Dean's Ultra Connector

REQUIRES: Balancer and LiPo compatible charger, or LiPo charger with built-in
            balancer such as the DuraTrax Onyx 235, DTXP4235

SPECS:    Battery Type: Lithium Polymer
          Cell Number: 2S
          Rated Pack Voltage: 7.4V
          Capacity: 6200mAh
          Max Recommended Charge Current: 1C (6.2A)
          Continuous Discharge: 50C (310amps)
          Pack Dimensions: 1.77 x 0.9 x 5.39" (45 x 25 x 137mm)
          Weight: 11.1oz (315.1g)
          Discharge Connector: 3.5" (88.9mm) 12AWG leads with Dean's Ultra
            Connector
          Balance Connector: Standard ElectriFly balance connector

COMMENTS: ALWAYS use a LiPo-approved Charger
          ALWAYS use a LiPo Cell Balancer
          NEVER Charge over 4.20V per cell
          NEVER Charge at currents greater than 1C
          NEVER Charge through the "To ESC or "DISCHARGE" lead
          NEVER Trickle Charge
          NEVER allow to Discharge below 2.5V per cell
          NEVER disassemble or modify pack wiring in any way or puncture cells
          NEVER place on combustible materials or leave unattended during
            charging
          ALWAYS Charge in a fireproof location
          ALWAYS set charger's output volts to match battery volts

                                                                   jxs 03/22/12
                                                                         ir/jxs