TrakPower LiPo 2S 7.4V 5600mAh 60C Hard Case w/Deans

Tower Stock# LXASUA  •  Manufacturer Stock# TKPC0390
TrakPower LiPo 2S 7.4V 5600mAh 60C Hard Case w/Deans (large view)
Shipping Restricted ItemDetails
Shipping Note:Details
Product WarningDetails
Notes from our tech department:
This is the TrakPower 2S 7.4V 60C 5600mAh Hard Case LiPo Battery
with Dean's Ultra Connector.


Ideal for 1/10 scale car applications
ROAR approved
Prewired with Dean's Ultra connector


2S 7.4V 50C 5600mAh LiPo Battery with Dean's Ultra Connector


Balancer and LiPo compatible charger, or LiPo charger with built-in
balancer such as the DuraTrax Onyx 235, DTXP4235


Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V
Capacity: 5600mAh
Max Recommended Charge Current: 1C (5.6A)
Continuous Discharge: 60C (336amps)
Pack Dimensions: 1.77 x 0.9 x 5.39" (45 x 25 x 137mm)
Weight: 10.5oz (298.4g)
Discharge Connector: 3.5" (88.9mm) 12AWG leads with Dean's Ultra
Balance Connector: Standard ElectriFly balance connector


ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts

jxs 11/01/12

‐ Mailing Address ‐
‐ Additional Contact Information ‐