AeroWorks Edge 540 QB ARF Orange/White/Black 50cc, 88"

Tower Stock# LXATCJ  •  Manufacturer Stock# AED540OWB50
AeroWorks Edge 540 QB ARF Orange/White/Black 50cc, 88
Shipping Note:Details
Notes from our tech department:
This is the radio controlled, gasoline powered almost-ready-to-fly
50cc Edge 540 QB (Quick Build) Airplane with Orange White Black Color Scheme
from Aeroworks.

FEATURES

Construction: Laser cut and jig built balsa and ply with pre-hinged
and glued double-beveled control surfaces
Wings: Balsa and ply construction with pre-hinged ailerons and 6061
T-6 anodized aluminum wing tube
Aileron Control: One servo per wing
Rudder Control: Single servo pull-pull system
Engine Box: Plywood, installed and fuel proofed, laser cut mounting
template
Cowl: Painted fiberglass
Covering: Ultracote
Canopy: Pre-mounted molded plastic
Landing Gear: Painted and pre-mounted 7075 Aluminum, 0.16" (4mm)
thick with 3.3" (85mm) diameter lite type wheels
Fuel Tanks: Two, 25.3oz (750cc), 15.2oz (450cc) one for smoke system
(not included)
Wheel Pants: Painted fiberglass
Building Time: Ready to fly in approximately 8-10 hours
Warranty: Aeroworks manufacturing guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This limited warranty does not cover any component parts damaged by
use or modification.

INCLUDES

Pre-built and covered wings, fuselage and tail assemblies, pushrods,
all hardware, decals, CG tool, two fuel tanks, landing gear, wheels
wing and stab tubes and instruction manual on CD

REQUIREMENTS

Radio: 6-channel minimum computer radio with PCM receiver strongly
recommended
Aileron Servos: Two digital metal gear 180 oz/in torque
Rudder Servos: One digital metal gear 180 oz/in torque
Elevator Servo: Two digital metal gear 180 oz/in torque
Throttle Servo: Standard size high speed
Servo Extensions: Four 6" Two 12" Two 36"
Receiver Battery: 6V 1700mAh minimum
Ignition Battery: 4.8V 1700mAh minimum
On/off Switches: Two with charge jacks
Engine: 50cc with standard or Pitts style muffler
Spinner: 3.5" (89mm)
Building and field equipment

SPECIFICATIONS

Wingspan: 88" (223cm)
Wing Area: 1395 sq in (90.12 sq dm)
Fuse Length: 78.5" (1.99m)
Fuse Length: 81.5" (2.07m) Rudder to Front of Spinner
Weight: 17 - 18lbs (7.7 - 8.2kg)
Cowl Width: 10" (254mm)
Rudder Height with Tail Wheel: 24.5" (622mm)
Center of Gravity: 5" (127mm) back from the leading edge of the wing
measured at the wing tip
Control Throws- 3D Rate High Rate Low Rate
Elevator up & down: 4.25" or 40 2" or 20 1.25" or 12
Rudder left to right: n/a or 45 n/a or 35 n/a or 25
Ailerons up & down: 3.5" or 40 2.25 or 25 1.75" or 20

jxs 07/25/13
ir/jxs

Resources
Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐