Use over raw wood to seal grain. Drys clear.
Used for Tissue Covered Aiplane Models, Control Line Airplane Models,
R/C Airplane and Boat Models, Wood Scouting Projects and Model
For use on paper, fabric coverings, balsa and basswood.
Contains no lead.
One 3.5 oz Glass Jar of Sanding Sealer Primer
Use in a well ventilated area with lung, eye and skin protection.
Brush to apply Sanding Sealer to the model.
Fluid Ounce: 3.5 oz (103.5 mL)
Fuel Proof: No, Do Not use as a final coat.
Flammable: Contains toluol and methyl ethyl keytone.
As with any type of painting procedure, always test for compatibility
of materials on a scrap piece before attempting to paint model.
For best results: 1. Sand entire model until smooth surface is
obtained by using progressively coarse to fine sandpaper.
2. Fill in any surface irregularities with Aero-Gloss Balsa
3. Stir Sanding Sealer thoroughly. Apply as many coats as required
with a full brush to obtain smooth surface. Sand between coats
using tack rag to wipe away dust.
4. Dry 72 hours before paint application. Topcoat Sanding Sealer
with Formula U or Aero-Gloss Dopes.