This is the 1/10 scale, glow powered, Ready to Run
Jammin' SCRT10 Short Course Racing Truck from Ofna.
FEATURES: Chassis: Aluminum 0.12" (3mm) thick with aluminum front and rear
stiffeners, side guards
Drive: Four wheel shaft, front universals
Radio: 2.4GHz direct sequence 3-channel with digital steering/
throttle trims, digital steering dual rates, throttle fail safe
steering servo and charge jack for optional rechargeable NiMH
batteries
Engine: .18 cu in (3.0cc) with pull starter, slide valve carburetor,
remote glow starter and foam air filter
Exhaust: Aluminum tuned pipe, black in color
Fuel Tank: 4.2oz (125cc)
Clutch: Three-shoe composite
Clutch Bell: 13 tooth steel
Spur Gear: 46 tooth steel
Brakes: Dual steel discs
Shocks: Oil filled, plastic body with white springs
Ball Bearings: Full set, sealed
Differentials: Three oil filled, planetary gear
Bumpers: Composite plastic front and rear, shock absorbing
Body: Painted and trimmed racing truck with all sponsor decals
applied
Tires: High traction 1.75" (38mm) wide, 3.8" (98mm) diameter, with
foam inserts
Wheels: 1.3" (34.5mm) wide, 2.4" (62mm) diameter, plastic
construction, black in color, blue bead locks
Suspension: C-hub with captured hinge pins with adjustable front and
rear sway bars and adjustable anti-squat plate
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Steering: Dual bellcrank with adjustable top loading servo saver
INCLUDES: RTR Jammin' SCRT10 Short Course truck, tires, wheels, foam inserts,
2.4GHz radio, painted body, decals, instruction manual, .18 cu in
engine, fuel bottle and "D" size glow starter
REQUIRES: AA Batteries: Eight for transmitter
Receiver Battery: 5-cell 6V hump
Battery Charger: For receiver battery
Fuel: 5%-30% Nitromethane (20% is recommended)
Building and Track Equipment
SPECS: Vehicle;
Length: 21" (533mm)
Width: 10.3" (263mm)
Ground Clearance: 1.6" (41mm)
Wheelbase: 12.6" (320mm)
Tread: 9.05" (230mm) center of wheels side to side
Track: 10.3" (263mm) outer edges of wheels side to side
Body;
Length: 21" (526mm)
Width: 9" (229mm) behind front wheels, narrowest point
10.1" (258mm) at rear wheels, widest point
Height: 5.4" (137mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 10x15mm Fr & R Diff 2 DTXC1595
2 10x15mm Center Diff 1 DTXC1595
2 5x10mm Clutch 1 DTXC1535
2 5x11mm Fr Gear Case 1 DTXC1547
4 5x11mm Fr Knuckle Arms 2 DTXC1547
2 5x11mm Rear Gear case 1 DTXC1547
2 5x11mm R Suspension Arms 1 DTXC1547
jxs 01/19/11
ir/jxs
|