This is the electric powered, radio controlled, almost ready to fly
                      Syncro EDF Glider from ElectriFly.
                   For modelers 14 years of age and older.

FEATURES: Construction: AeroCell foam
          Wings: Two sets, glider wing for long relaxing flights and sport wing
            for jet-like graceful aerobatics
          Aileron Control: Dual servo, glider or sport wing configuration
          Ducted Fan: 56mm EDF unit
          Power Pod: Ducted fan type, attaches to center of wings with magnets
            and one bolt
          Landing Gear: 0.08" (2mm) diameter wire
          Wheels: Three foam, two 1.5" (38mm) diameter, one 1" (25.4mm)
          Battery Compartment: Large size allows easy access without removing
            wing
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase.

INCLUDES: Syncro EDF Glider, HyperFlow 370 Ducted Fan Unit, Landing Gear,
            18" (450mm) Y-harness, 9.4" (240mm) Y-harness, Motor Leads, Decals,
            Airplane & Ducted Fan Instruction Manuals

REQUIRES: Radio: At least 4-channels
          Servos: Six micro, two for elevator and rudder and two for each wing
          Extension: 6" (152mm)
          Motor: Ammo 24-33-4040kV In-Runner Brushless (GPMG5165) recommended
          Electronic Speed Control: 25A brushless compatible
          Battery: 11.1V 1800mAh LiPo
          Battery Charger: LiPo compatible
          Building and field equipment

SPECS:    Length: 24.5" (875mm)
          Wingspan: Glider, 55.5" (1410mm)
                    Sport, 31.5" (800mm)
          Wing Area: 400 sq in (25.8 sq dm)
                     219 sq in (14.1 sq dm)
          Weight: Glider, 28.0 - 29.5oz (795 - 835g)
                  Sport, 22.5 - 24.0 (640 - 680g)

          Control Throws              Low Rate             High Rate
            Elevator Up & Down      1/4" (6.5mm) 11°     3/8" (10mm) 17°
            Rudder                  3/8" (10mm)  13°     5/8" (16mm) 22°
            Ailerons (Glider Wing)  1/4" (6.5mm) 12°     3/8" (10mm) 18°
            Ailerons (Sport Wing)   3/16" (5mm)   8°     5/16" (8mm) 13°
            Center of Gravity:
          Center of Gravity:
            Glider Wing, 4" (102mm) from middle of wing
                         2-1/2" (64mm) back from leading edge
              Mark two more lines 1/4" (6.4mm) ahead of each marked line
            Sport Wing, 4" (102mm) from middle of wing
                        2-3/4" (70mm) back from leading edge
              Mark two more lines 3/8" (10mm) ahead of each marked line
            Place fingers on middle balance lines and lift. Model should
              balance on middle lines.

                                                                   jxs 03/24/11
                                                                         ir/jxs