This is the electric powered, radio controlled, 1/8 scale
                 Mugen MBX6-ECO Off Road Buggy factory built kit.

FEATURES: Chassis: A7075 T6 aluminum 0.12" (3mm) thick
          M Spec - Factory built kit
          Drive: Four wheel three differential shaft drive
          Shocks: Four oil filled 15mm aluminum body
          Shock Towers: 0.16" (4mm) thick carbon graphite
          Gearbox: Sealed, front and rear
          Differentials: Planetary geared
          Motor Mount: Two piece
          Transmission: Single-speed
          Ball Bearings: Full set
          Suspension: Pillow ball
          Body: Clear buggy type
          Pinion: 14T
          Spur Gear: 46 tooth
          Battery/ESC tray: Accomodates two batteries
          Camber Tie Rods: Adjustable, Camber describes the angle at which the
            tires sit vertically
          Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which
            the tires point inward as viewed from above
          Steering: Bell-crank type, with carbon graphite steering brace and
            adjustable Ackerman. Ackerman describes the effect of the inside
            front wheel turning faster than the outside front wheel during
            turns

INCLUDES: Mugen MBX6-ECO Off Road Buggy Kit with clear buggy body,
            rear wing, decal sheet, window mask sheet, battery/ESC tray,
            14t pinion and illustrated instrucion manual

REQUIRES: Motor: 1/8 scale brushless motor
          ESC:   1/8 scale brushless motor compatible ESC
          Radio: 2-channel with standard servo for throttle
          Tires, Foam Inserts, and Wheels: 1/8 scale buggy
          Building and track equipment

SPECS:      Vehicle
          Length:    18" (457mm)
          Width: 12-1/8" (309mm)
          Wheelbase: 12.5 - 12.75" (320 - 325mm)
          Gear Ratio: 11.12:1
          Weight: 7.4lb (3,370g)
            Body-
          Length:   13" (330mm)
          Width:   6.9" (177mm)
          Height:  3.9" (101mm)

COMMENTS: For replacement Ball Bearings use:
            Qty.  Size      Location            Qty.  Bearing Set
             6   8x16mm    Fr/R/Center Diffs     3     DTXC1585
             4   8x16mm    Fr/R Gear Cases       2     DTXC1585
             2   8x16mm    Front Hubs            1     DTXC1585
             2   15x21mm   Front Hubs            1     ASCC6862
             2   8x16mm    Rear Hubs             1     DTXC1585
             2   15x21mm   Rear Hubs             1     ASCC6862

                                                                   ajw  3/23/11