This is the Futaba R6208SB 2.4GHz FASST S.Bus 8-Channel High Voltage Receiver.

FEATURES: Utilizes digital serial data communication technology to transmit
            control signals between the receiver and servos using S.Bus hubs
            and cables (available separately)
          Easy programming with the SBC-1 Channel Setting Tool (FUTM4190),
            S-Bus receivers or PCLink software
          SBD-1 decoder cables (not included) allow the use of existing
            analog and digital servos
          Handles eight channels without S.Bus usage or as many as the
            available number of channels on transmitter with S.Bus use
          Prevents mismatched servo/channel connections
          Full-range receiver with DAD (Dual Antenna Diversity) that can be
            used in any flight application
          One year limited warranty through Hobby Services beginning at date of
            purchase

INCLUDES: Futaba R6208SB 2.4GHz FASST 8-Channel Receiver with Instructions and
            Short Plug for connection the DATA port when an S.Bus channel is
            set

REQUIRES: Linking to transmitter and setting servo channels

SPECS:    Power Requirement: 3.7V or 7.4V battery or regulated output from ESC*
            *output capacity must meet usage condition
          Voltage Range: 3.5 - 8.4V
          Dimensions: 0.98 x 1.86 x 0.56" (24.9 x 47.3 x 14.3mm)
          Weight: 0.49oz (13.8g)

COMMENTS: FUTM4191  SBD-1 SBUS Decoder 1600mm
          FUTM4192  SBD-1 SBUS Decoder 1100mm
          FUTM4193  SBD-1 SBUS Decoder 400mm

          If data plug lost, it can be constructed from a male Futaba J
          connector (FUTM4500) with red and white wires (signal and positive)
          soldered together and black wire cut off. It's just a jumper plug.

                                                                   jxs 05/10/11
                                                                         ir/jxs