This is the radio controlled, glow powered,
                Titan X50 Torque-Tube 50 Class 3D Helicopter.

FEATURES: Tail Drive: Torque tube driven tail rotor for crisp rudder response
            and 100% power transfer, lightweight 0.92oz (26g) metal tail case
            with 6mm transfer shaft
          Main Blades: Carbon,  23.6" (600mm)
          Main Shaft: (10mm) hardened steel
          Feathering Shaft: 7mm
          Rotor Head: Metal underslung design
          Fan: Shrouded for efficient heat dissipation
          Canopy: Preprinted fiberglass
          Frame Sections: One-piece carbon, slim profile design, only 1.2"
            (30mm) wide
          Paddles: Lightweight 0.70oz (20g) for high 3D performance
          Fuel Tank: 16.2oz (480cc) total capacity of main and header tanks
          Landing Gear: Plastic with aluminum skids
          Tail Boom: Compound carbon/aluminum
          Receiver Tray: Lengthened for LiPo packs

INCLUDES: Titan X50 Torque-Tube 50 Class 3D Heli, Canopy, Main Blades, Fuel
            Tanks, Tail Boom, Decals and Instruction Manual

REQUIRES: Radio: At least 6-channel
          Servos: Four standard with digital rudder servo
          Gyro: Heading lock
          Flight Battery: 4.8V NiMH, at least 1200mAh
          Engine: .50 heli engine
          Glow Fuel: Heli blend with 15-30% nitro content
          Starting Shaft: 6mm hex size
          Electric Starter: 12V .90 size
          Remote Glow Starter
          Building and field equipment

SPECS:    Length: 47.24" (1200mm)
          Width:   7.87" (200mm)
          Main Rotor Diameter: 52.95" (1345mm)
          Main Rotor Length: 23.62" (600mm)
          Tail Rotor Length: 3.74" (95mm)
          Gear Ratio: 1:8, 5:4.56
          Fully Equipped Weight: 7.16lbs (3250g)

COMMENTS:

                                                                   jxs 03/15/11
                                                                         ir/jxs