This is the 1/10 scale electric powered, radio controlled, ready to run,
                        Traxxas Grinder Monster Truck.
                    Part of the Monster Jam Replica Series.

FEATURES: Chassis: Composite nylon tub style
          Drive: Rear wheel with telescoping universal-joint driveshafts
          Motor: Traxxas Titan modified 12 turn 550 with internal cooling fan
          Radio: Traxxas TQ 27MHz AM 2-channel pistol grip with high-torque
            waterproof steering servo, 4-channel micro receiver
          ESC: XL-5 with reverse and training mode
          Transmission: Brushless ready Magnum 272 metal gear transmission with
            rubber sealed ball bearings, and Revo-spec Torque-Control slipper
            clutch
          Differential: Planetary gear
          Pinion Gears: Two 48 pitch, 19 tooth is installed, 23 tooth included
            for higher top speeds
          Battery: Traxxas Power Cell 3000mAh 8.4V 7-cell hump with high-
            current connector
          Battery Charger: 110V AC wall type
          Body: Painted and trimmed Advance Auto Parts Grinder
          Shocks: Oil-filled Ultra
          Steering; Single point
          Suspension: Long travel
          Differential: Steel planetary gears, brushless ready
          Tires: 2.8" (71mm) wide Monster Jam (no foam inserts)
          Wheels: Beadlock style Monster Jam

INCLUDES: RTR Traxxas Grinder Monster Truck, AM radio, 12 turn motor, ESC,
            painted body, 19 and 23 tooth pinion gears, decals and
            instruction manual

REQUIRES: AA Batteries: Eight for transmitter

SPECS:      Vehicle-
          Length: 16.25" (413mm)
          Front and Rear Track: 12.75" (324mm) distance between outer edges of
            tires side to side
          Weight: 65.3oz (1.85kg)
          Maximum Height: 9.5" (234mm)
          Wheelbase: 10.63" (270mm)
          Ground Clearance: 4" (102mm)
            Body-
          Length: 16.1" (408mm)
          Width:   6.4" (164mm) at rear wheels, widest point
                   4.9" (125mm) at center section, narrowest point
          Height:  4.6" (117mm)

COMMENTS: The Grinder is available in the following 27MHz channels;
            A2  TRAD34A2       A5  TRAD34A5
            A4  TRAD34A4       A6  TRAD34A6
          The bodies are licensed, so color and paint schemes are the same for
            all channels.

          For replacement or to upgrade to Ball Bearings use:
          Quantity    Size      Location          Order   Stock Number
             4      5x11mm     Front Hubs           2       DTXC1547
             4      5x11mm     Rear Hubs            2       DTXC1547
             6      5x11mm     Transmission         3       DTXC1547

                                                                   jxs 01/24/11
                                                                         ir/jxs