This is the Futaba 6JH 6-Channel 2.4GHz
                S-FHSS and FHSS Selectable Mode Radio System
       with the R2006GS Receiver and four S3001 Ball Bearing Servos.

     This is the helicopter version with the non-ratcheted throttle stick.

FEATURES: Selectable S-FHSS and FHSS modes, the included R2006GS receiver
            automatically adapts to the selected mode
          Capable of 4 channels only in FHSS mode
          Fail safe on all channels in S-FHSS mode only (throttle channel only
            when FHSS mode is selected)
          15 model memory with 4 character model naming
          40x40 127 segment LCD display
          Modes 1-4 selectable by pilot
          R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link
            circuitry, frequency hopping, spread spectrum design and Dual
            Antenna Diversity
          Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut

          Trainer system (trainer cord not included)
          One year limited warranty through Hobby Services beginning at date of
            purchase
          Airplane Features;
            Two programmable mixes and two 5-point throttle curves
            Two 5-point pitch curves
            Flaperon with differential rate
            Flap trim (2 rates)
            V-tail mixing
            Elevon mixing
          Helicopter Features;
            Two 5-point throttle curves
            Three 5-point pitch curves
            Throttle hold
            Hover pitch
            Gyro and revo mixing
            Four swash plate types (H1, H3, HR3 & H3 w/AFR)
            Swash AFR (ail/ele/pitch)
            Throttle mix
            Electronic swash ring
            Throttle and pitch delay

INCLUDES: Futaba 6J 6-Channel Transmitter, R2006GS Receiver and Instruction
            Manual, Neckstrap, Servo Tray and Mounting Hardware, On/Off Switch
            and ratchet spring
          Four S3001 Standard Ball Bearing Servos, FUTM0029
          **** There is an optional NiMh battery which can be used,
             FUTM1473. To use this, you will need to purchase a new
             battery door and charge lead from Futaba Services, see comments.

REQUIRES: AA Cells: Four for transmitter

SPECS:      Transmitter;
          Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
          Frame Rate: 6.8ms
          Current Drain: 170mA
            Receiver;
          Modes: FHSS or S-FHSS (auto selectable)
          Power Requirements: 4.8V-7.4V
          Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
          Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)
          Weight: 0.29oz (8.3g)
          Current Drain: 80mA (@ no signal)
            S3001 Servo;
          Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16")
                      (40 x 20 x 36mm)
          Weight: 1.6oz (1-9/16oz) (44g)
          Torque: 33 oz-in (2.4kg-cm) @ 4.8V
                  42 oz-in (3.0kg-cm) @ 6V
          Transit: 0.28 sec/60° @ 4.8V
                   0.22 sec/60° @ 6V

COMMENTS: To use the NiMH battery FUTM1473, you will need to purchase
          charger FUTM1832. Than call Futaba Services at 217-398-8970
          option 2 and they will send you a battery door- HSP82469. If
          you already have a charger and need a charge lead they can
          sell you part number- HSP29615. (requires soldering on the
          correct charger plugs)

                                                                   jxs 02/28/11
                                                                         ir/jxs
                                                              updt jxs 12/05/11
                                                               updt jpg 2/25/13