This is an 1/8 scale electric powered, radio controlled,
                80% Pre-Built Ultra LX-2E Off-Road Buggy Kit.

FEATURES: Chassis: CNC machined 0.12" (3mm) thick with hard anodized aluminum
            front and center top plates, plastic stone guards and front and
            rear braces
          Drive: Four wheel shaft
          Motor Mount: One-piece CNC aluminum
          Ball Bearings: Rubber sealed
          Shocks: Oil-filled 16mm Big Bore, hard coated aluminum body
          Shock Towers: Aluminum
          Spur Gear: Lightweight composite 51 tooth
          Differentials: Planetary geared
          Tires: Triad racing
          Wheels: White dish type
          Body: Molded from polycarbonate plastic, clear and untrimmed,
            high downforce wing molded in white
          Suspension: Front C-hub, front and rear sway bars
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle

INCLUDES: Ofna Ultra LX-2e Buggy 80% Pre-Assembled Roller, body, wing, decals
            tires, wheels and instruction manual

REQUIRES: Radio: 2-Channel with 2 Servos
          Radio Batteries: (8) AA size
          Motor: Brushless motor for best performance, Ofna recommends the
            Mamba Monster Brushless Power System with 2650kV Motor and
            Programmable ESC, CSEC6202
          Battery: 2S to 4S LiPo
          Battery Charger: LiPo compatible
          Building and track equipment

SPECS:      Vehicle-
          Length:          19.5" (495mm)
          Width:           11.7" (298mm)
          Weight:           6.2lbs (2812g)
          Wheelbase:       12.9" (330mm)
             Body-
          Length:          14.7" (374mm)
          Width:            7.9" (200mm) at widest point
          Height:           4.2" (108mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             2   7x19mm    Front Diff                  1   DTXC1579
             2   7x19mm    Rear Diff                   1   DTXC1579
             2   7x19mm    Center Diff                 1   DTXC1579
             2   6x13mm    Fr Gear Case                1   DTXC1573
             2   6x13mm    Rear Gear Case              1   DTXC1573
             4   8x16mm    Fr Knuckle Arms             2   DTXC1585
             4   8x16mm    Rear Hubs                   2   DTXC1585

                                                                   jxs 07/12/11